Valid

YB/T 4393.3-2025(Methods for chemical analysis of ferroaluminumn, ferromanganese-aluminum and ferromanganese-aluminum-silicon - Part 3: Determination of aluminum, silicon, manganese, phosphorus, copper contents - Wavelength dispersive X-ray fluorescence spectrometric(fus (English PDF)

铝铁、铝锰铁及硅铝锰铁分析方法第3部分:铝、硅、锰、磷、铜含量测定波长色散X射线荧光光谱法(玻璃熔片法)

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YB/T 4393.3-2025 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

December 17, 2025

Implementation date

July 1, 2026

Scope

YB/T 4393.3-2025 is the English-translated version of 铝铁、铝锰铁及硅铝锰铁分析方法第3部分:铝、硅、锰、磷、铜含量测定波长色散X射线荧光光谱法(玻璃熔片法).

YB/T 4393.3-2025 is the Chinese standard "(Methods for chemical analysis of ferroaluminumn, ferromanganese-aluminum and ferromanganese-aluminum-silicon - Part 3: Determination of aluminum, silicon, manganese, phosphorus, copper contents - Wavelength dispersive X-ray fluorescence spectrometric(fus".

This standard specifies a method for determining the content of Al, Si, Mn, P, and Cu using wavelength dispersive X-ray fluorescence spectrometry (XRF) on a fused glass slide.

This standard is applicable to the determination of the content of Al, Si, Mn, P, and Cu in ferroaluminum, ferromanganese, and ferrosilicon. It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.

Found what you need?

Document preview — YB/T 4393.3-2025

National Standard of the People's Republic of China

ICS
77.100
Classification
H11

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 3 Terms and Definitions
  • 4 Order information
  • 5 Test method
  • 6 Technical requirements
  • 7 Test methods
  • 8 Inspection rules

1 Foreword

YB/T 4393.3-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.

It is one of 3 parts of the YB/T 4393 series.

The YB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies a method for determining the content of Al, Si, Mn, P, and Cu using wavelength dispersive X-ray fluorescence spectrometry (XRF) on a fused glass slide. This standard is applicable to the determination of the content of Al, Si, Mn, P, and Cu in ferroaluminum, ferromanganese, and ferrosilicon.

YB/T 4393.3-2025 falls under ICS 77.100, in the field of metallurgy.

This catalogue holds 971 other YB/T standards in that field.

In this catalogue, YB/T standards carry edition years from 1980 to 2026.

3 About this standard

Sector: Ferrous Metallurgy Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Other parts of this standard:

YB/T 4393-2014 — Ferroaluminumn, ferromanganese-aluminum and ferromanganese-aluminum-sillicon. Determination of aluminum content. EDTA titrimetric method

YB/T 4393.2-2023 — Methods for analysis of ferroaluminum, ferroaluminum manganese and ferrosilicon aluminum manganese - Part 2: Determination of phosphorus content Bismuth phosphorus molybdenum blue spectrophotometry

Standards on related subjects:

GB/T 3654.3-2019 — Ferroniobium—Determination of silicon content—Gravimetric method

GB/T 4336-2016 — Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method)

GB/T 4701.1-2009 — Ferrotitanium - Determination of titanium content - The ammonium ferric sulfate titration method

YB/T 4392.1-2014 — Sulphat titanium slag. Determination of valent titanium oxide content. Titanium trichloride titration

5 Classification and status

International classification (ICS): 77.100

Chinese Standard Classification (CCS): H 11

Prefix YB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YB/T 4393.3-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YB/T 4393.3-2025

$165.00