YB/T 4307-2012Iron, steel and alloy. Determination of oxygen, nitrogen and hydrogen contents. TOF-mass spectroscopy method after fusion in a current of inert gas(Routine method) (English PDF)
钢铁及合金 氧、氮和氢含量的测定 脉冲加热惰气熔融-飞行时间质谱法(常规法)
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for YB/T 4307-2012 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2012
Implementation date
January 1, 2012
Scope
YB/T 4307-2012 is the English-translated version of 钢铁及合金 氧、氮和氢含量的测定 脉冲加热惰气熔融-飞行时间质谱法(常规法).
YB/T 4307-2012 is the Chinese standard "Iron, steel and alloy. Determination of oxygen, nitrogen and hydrogen contents. TOF-mass spectroscopy method after fusion in a current of inert gas(Routine method)".
This standard specifies the pulse heating inert gas fusion flight time mass spectrometry steel and alloy oxygen, nitrogen and hydrogen content method. This standard applies to steel and alloy oxygen, nitrogen and hydrogen content.
It was issued by Ministry of Industry and Information Technology. It cites 3 other standards.
Found what you need?
Document preview — YB/T 4307-2012
National Standard of the People's Republic of China
- ICS
- 77.080.01
- Classification
- H11
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Order information
- 5 Test method
- 6 Technical requirements
- 7 Test methods
- 8 Inspection rules
1 Foreword
YB/T 4307-2012 is issued by Ministry of Industry and Information Technology.
The YB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 8 pages in English translation.
2 Scope Preview
This standard specifies the pulse heating inert gas fusion flight time mass spectrometry steel and alloy oxygen, nitrogen and hydrogen content method. This standard applies to steel and alloy oxygen, nitrogen and hydrogen content.
YB/T 4307-2012 falls under ICS 77.080.01, in the field of metallurgy.
This catalogue holds 971 other YB/T standards in that field.
In this catalogue, YB/T standards carry edition years from 1980 to 2026.
3 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.
GB/T 6379.1
GB/T 6379.2
GB/T 20066
4 About this standard
Issued by: Ministry of Industry and Information Technology
English translation: about 8 pages (approximate)
5 Related standards
Standards on related subjects:
GB/T 3654.3-2019 — Ferroniobium—Determination of silicon content—Gravimetric method
GB/T 4336-2016 — Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method)
GB/T 4701.1-2009 — Ferrotitanium - Determination of titanium content - The ammonium ferric sulfate titration method
YB/T 4306-2012 — Steel, iron and alloy. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas
YB/T 4305-2012 — Steel, iron and alloy. Determination of oxygen content. Infrared method after fusion under inert gas
YB/T 4302-2012 — Determination of oil and iron remainders on cold rolled plate and strip surface
6 Classification and status
International classification (ICS): 77.080.01
Chinese Standard Classification (CCS): H 11
Prefix YB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6379.1Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
- GB/T 6379.2Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
- GB/T 20066Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
How to Download YB/T 4307-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 20066-2006 — Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
GB/T 6379.1-2004 — Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
GB/T 6379.2-2004 — Measurement methods and results -- Accuracy (trueness and precision) -- Part 2: Determine the standard methods of measurement repeatability and reproducibility of the basic method
YB/T 4307-2012
$135.00