Valid

TY/T 2003.6-2021Sports surface layer performance test method - Part 6: Ball rolling performance (English PDF)

运动面层性能测试方法 第6部分:球滚动性能

Preview PDF

This is a limited preview

Buy now to download the full PDF (14 pages)

Need quotation for your management?

Get a formal quotation for TY/T 2003.6-2021 in 30 minutes.

Issued by

General Administration of Sport

Level / Type

National · Recommended

Issue date

July 8, 2021

Implementation date

January 1, 2022

Scope

TY/T 2003.6-2021 is the English-translated version of 运动面层性能测试方法 第6部分:球滚动性能.

TY/T 2003.6-2021 — This document specifies the test conditions, equipment, samples, test principles, test procedures, data processing, test test report, etc. This document applies to the testing of the rolling performance of sports surface balls.

Found what you need?

Document preview — TY/T 2003.6-2021

National Standard of the People's Republic of China

ICS
97.220.10
Classification
Y 55

Issued by: General Administration of Sport

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Test Conditions
  • 4.1 Laboratory tests
  • 4.2 Field Test

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

This document is part 6 of TY/T 2003 "Testing Methods for Performance of Sports Surfaces". TY/T 2003 has or will release the following part.

--- Part 1: Specifications;

--- Part 2: Thickness;

--- Part 3: Anti-slip value;

--- Part 4: Shock absorption;

--- Part 5: Vertical deformation;

--- Part 6: Ball rolling performance;

--- Part 7: Vertical ball bounce;

--- Part 8: Rolling load;

--- Part 9: Tensile properties of synthetic materials.

Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.

Introduction

The surface performance test method is an important technical support to verify whether the sports surface meets the requirements for use, ensure sports safety, and ensure the quality of the venue.

support. TY/T 2003 "Sports Surface Performance Test Methods" series of standards aim to consolidate the basic standard system of sports facilities and equipment, provide scientific, an efficient and advanced method for testing motion surfaces. In order to avoid the length of the standard and simplify the process of using the standard query, the standard will move the surface layer performance.

The test methods for each project are respectively established and are to be composed of the following parts.

--- Part 1: Specifications. The purpose is to provide a detection method for the flatness, slope, size, angle, etc. of the moving surface layer.

--- Part 2: Thickness. The purpose is to provide a detection method for the thickness and absolute thickness of the moving surface layer.

--- Part 3: Anti-slip value. The purpose is to provide a detection method for the anti-slip value of the moving surface.

--- Part 4: Shock absorption. The purpose is to provide a detection method for the impact absorption of the sports surface layer.

--- Part 5: Vertical deformation. The purpose is to provide a detection method for the vertical deformation and standard vertical deformation of the moving surface layer.

--- Part 6: Ball rolling performance. The purpose is to provide a detection method for the ball rolling performance of the moving surface layer.

--- Part 7: Vertical ball bounce. The purpose is to provide detection for the vertical ball bounce height and vertical ball bounce rate of the sports surface layer method.

--- Part 8: Rolling loads. The purpose is to provide a detection method for the rolling load of the moving surface layer.

--- Part 9: Tensile properties of synthetic materials. The purpose is to provide a detection method for the tensile strength and elongation at break of the sports surface layer.

Sports surface performance test method Part 6: Ball Rolling Performance Caution - Persons using this document should have practical experience in formal laboratory work. This document does not address all possible security issues it is the user's responsibility to take appropriate safety and health measures, and to ensure compliance with the conditions stipulated by relevant national regulations.

1 Scope

This document specifies the test conditions, equipment, samples, test principles, test procedures, data processing, test test report, etc.

This document applies to the testing of the rolling performance of sports surface balls.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

TY/T 2003.7-2021 Test method for sports surface performance-Part 7: Vertical ball bounce

3 Terms and Definitions

The terms and definitions defined in TY/T 2003.7-2021 and the following terms and definitions apply to this document.

sportssurface

A surface layer with sports function and sports protection function that directly withstands various physical and chemical effects.

[Source. GB/T 38373-2019, 2.1.1] 3.2 Ball rolling performance balroling the test ball rolls and falls from a specified height along a 45° slope to the forward rolling distance on the sports surface and the degree of deviation from the falling track.

Note. Usually, the ball rolling distance indicates the distance that the test ball continues to roll forward after leaving the inclined plane; the ball rolling deviation indicates that the test ball rolls from the inclined plane to the degree to which the surface layer deviates from the falling track.

4 Test Conditions

4.1 Laboratory tests

The ambient temperature should be (23±2)°C.

4.2 Field Test

The ambient temperature should be 5°C~40°C, and the wind speed should not be greater than 2.0m/s.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.

How to Download TY/T 2003.6-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
14 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

TY/T 2003.6-2021

$210.00