TCSAE 70-2018The sunlight simulation accelerated aging test method for the passenger vehicle (English PDF)
乘用车整车太阳光模拟加速老化试验方法
This is a limited preview
Buy now to download the full PDF (10 pages)
Need quotation for your management?
Get a formal quotation for TCSAE 70-2018 in 30 minutes.
Issued by
China Society of Automotive Engineers
Level / Type
National · Mandatory
Issue date
March 1, 2018
Implementation date
March 1, 2018
Scope
TCSAE 70-2018 is the English-translated version of 乘用车整车太阳光模拟加速老化试验方法.
TCSAE 70-2018 — The sunlight simulation accelerated aging test method for the passenger vehicle
Found what you need?
Document preview — TCSAE 70-2018
National Standard of the People's Republic of China
- Classification
- T 40
Issued by: China Society of Automotive Engineers
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Hot-dry climate
- 3.2 Warm-wet climate
- 3.3 Sunlight simulation accelerated aging test for the complete vehicle
- 4 Test equipment
- 4.1 Test chamber
- 4.2 Acquisition equipment
- 5 Test samples
- 5.1 Test prototype vehicle
- 5.1.1 Color requirements for prototype vehicle
- 5.1.2 State requirements for prototype vehicle
- 5.2 Reference samples
- 6 Test period and conditions
- 6.1 Hot-dry climate cycle test
- 6.1.1 Conditions
- 6.1.2 Conditions of single hot-dry climate cycle test
- 6.2 Warm-wet climate cycle test
- 6.2.1 Conditions
- 6.2.2 Conditions of single warm-wet climate cycle test
- 7 Test procedure
- 7.1 Test preparation
- 7.1.1 Vehicle inspection prior to test
- 7.1.2 Installation of acquisition equipment
- 7.1.3 Initial performance inspection
- 7.2 Test procedure
- 7.3 Inspection at end of test
- 8 Test report
1 Foreword
TCSAE 70-2018 was issued by China Society of Automotive Engineers on 1 March 2018 and took effect the same day.
Some of the elements of this standard may be the subject of patent rights. The issuing authority of this standard shall not be held responsible for identifying any or all such patent rights.
This standard was proposed by the C&AP Committee of SAE-China.
This standard is approved by the Society of Automotive Engineering of China.
This standard is under the jurisdiction of the Society of Automotive Engineering of China.
This standard was issued in March 2018 for the first time.
2 Scope Preview
This standard specifies the test equipment, test samples, test period and conditions as well as test process for the sunlight simulation accelerated aging test for passenger vehicles. It is applicable to the sunlight simulation accelerated aging test for passenger vehicles under the simulated environment conditions in the laboratory.
TCSAE 70-2018 is filed under Chinese Standard Classification T 40, in the field of vehicles.
This catalogue holds 37 other TCSAE standards without an ICS number.
In this catalogue, TCSAE standards carry edition years from 2015 to 2020.
3 Normative references
GB/T 250 — Textiles - Tests for color fastness - Grey scale for assessing change in color
GB/T 1766 — Paints and varnishes - Rating schemes of degradation of coats
GB/T 8424.3 — Textile - Tests for colour fastness - Calculation of colour differences
GB/T 8807 — Test method for specular gloss of plastics
GB/T 9754 — Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60°and 80°
GB/T 15596 — Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
4 About this standard
Issued by: China Society of Automotive Engineers
English translation: about 10 pages
Chinese original: about 15,130 characters
5 Related standards
Standards on related subjects:
QC/T 1029-2016 — Polypropylene (PP) honeycomb board products for automobiles
QC/T 797-2008 — Material identification and marking of automotive plastic, rubber and thermoplastic elastomer parts
6 Classification and status
Chinese Standard Classification (CCS): T 40
Prefix TCSAE: association standard, adopted voluntarily.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 10 pages — is available in the English PDF.
How to Download TCSAE 70-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
TCSAE 143-2020 — Test and assessment specifications for integrated electric drive system of battery electric passenger cars
TCSAE 144-2020 — Energy efficiency level and test methods for drive motor system and electric drive assembly used on electric vehicles
TCSAE 145-2020 — Air conditioning system maximum cooling performance test procedure for passenger vehicle
TCSAE 70-2018
$105.00