Valid

TCSAE 52-2016Test method of mechanical properties for metallic sheets at high strain rates (English PDF)

金属板材在高应变速率下的力学性能测试方法——液压伺服控制系统及其他控制系统

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for TCSAE 52-2016 in 30 minutes.

Issued by

China Society of Automotive Engineers

Level / Type

National · Mandatory

Issue date

May 26, 2016

Implementation date

May 26, 2016

Scope

TCSAE 52-2016 is the English-translated version of 金属板材在高应变速率下的力学性能测试方法——液压伺服控制系统及其他控制系统.

TCSAE 52-2016 — This standard specifies the principles, symbols and descriptions, specimens and devices for tensile testing of automotive sheet metal at high strain rates.

This standard is applicable to automotive sheet metal with a thickness of 3mm or less (including 3mm). The strain rate required for the test is 10-2s-1~ 103s-1, test temperature is 10 ° C ~ 35 ° C (or by mutual agreement).

This standard applies to hydraulic servo test systems. Unless otherwise stated, different strain rates are selected for sheet metal of the same specification. It should be done on the same test equipment.

Note 1. When the strain rate of the test is less than 10-2s-1, the comparison test can be carried out using a quasi-static tensile tester.

Found what you need?

Document preview — TCSAE 52-2016

National Standard of the People's Republic of China

ICS
43.120
Classification
T 40

Issued by: China Society of Automotive Engineers

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Scope description
  • 1.2 Application Notes
  • 2 Standard References
  • 3 Symbols, names and units
  • 4 Principles
  • 5 Test equipment
  • 6 Sample
  • 7 Test requirements
  • 8 Test report

1 Foreword

TCSAE 52-2016 was issued by China Society of Automotive Engineers on 26 May 2016 and took effect the same day.

The TCSAE prefix marks a association standard, adopted voluntarily.

The document runs to 17 pages in English translation.

2 Scope Preview

This standard specifies the principles, symbols and descriptions, specimens and devices for tensile testing of automotive sheet metal at high strain rates. This standard is applicable to automotive sheet metal with a thickness of 3mm or less (including 3mm). The strain rate required for the test ranges from 10-2s-1 to 103s-1, and the test temperature is from 10°C to 35°C (or determined by both parties). This standard applies to hydraulic servo test systems. Unless otherwise stated, the different strain rates selected for sheet metal of the same specification shall be performed on the same test equipment. Note 1: When the strain rate of the test is less than 10-2s-1, the comparison test can be carried out using a quasi-static tensile tester.

TCSAE 52-2016 falls under ICS 43.120, in the field of road vehicle engineering.

This catalogue holds 32 other TCSAE standards in that field.

In this catalogue, TCSAE standards carry edition years from 2015 to 2020.

3 About this standard

Issued by: China Society of Automotive Engineers

English translation: about 17 pages

Chinese original: about 26,274 characters

4 Related standards

Standards on related subjects:

QC/T 1029-2016 — Polypropylene (PP) honeycomb board products for automobiles

QC/T 797-2008 — Material identification and marking of automotive plastic, rubber and thermoplastic elastomer parts

5 Classification and status

International classification (ICS): 43.120

Chinese Standard Classification (CCS): T 40

Prefix TCSAE: association standard, adopted voluntarily.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

How to Download TCSAE 52-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

TCSAE 52-2016

$335.00