Valid

TCSAE 50-2016Dent Resistance Test Standard of Automobile Outer Panel (English PDF)

汽车外覆盖件抗凹性能测试标准

Preview PDF

This is a limited preview

Buy now to download the full PDF (11 pages)

Need quotation for your management?

Get a formal quotation for TCSAE 50-2016 in 30 minutes.

Issued by

China Society of Automotive Engineers

Level / Type

National · Mandatory

Issue date

May 26, 2016

Implementation date

May 26, 2016

Scope

TCSAE 50-2016 is the English-translated version of 汽车外覆盖件抗凹性能测试标准.

TCSAE 50-2016 — This specification specifies the relevant definitions, principles, test equipment, test procedures, and tests for the test methods for the anti-concave performance of automotive exterior covers.

Data processing method. This specification applies to passenger cars and light commercial vehicles, including body-in-white and related paint parts.

Found what you need?

Document preview — TCSAE 50-2016

National Standard of the People's Republic of China

ICS
43.120
Classification
T 40

Issued by: China Society of Automotive Engineers

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Scope description
  • 1.2 Application Notes
  • 2 Normative references
  • 3 Terms and definitions
  • 3.2 Abbreviations
  • 3.3 Symbols
  • 4 Test conditions and requirements
  • 4.1 Test environmental conditions
  • 4.2 Instrumentation
  • 4.3 Test equipment
  • 4.4 Test requirements
  • 4.5 Sealing material
  • 4.6 Electrical transient conduction emission along the power line
  • 4.7 Electromagnetic radiation immunity
  • 4.8 Electrostatic discharge immunity
  • 4.9 Magnetic field immunity
  • 5 Test method
  • 5.1 Basic requirements
  • 5.2 Performance test
  • 5.3 Safety test
  • 5.4 Environmental adaptability test
  • 5.5 EMC test
  • 5.6 NVH test
  • 5.7 Reliability test
  • 5.8 Immunity of portable transmitter
  • 5.9 Electrical transient conduction immunity along power lines
  • 6 Test report and results
  • 6.1 Overview
  • 6.2 Seal position
  • 6.3 Leakage noise of the whole vehicle
  • 6.4 Local leakage noise
  • 6.5 Basic principles of working condition formulation
  • 6.6 Transmission gear selection
  • 7 Test report
  • 7.1 Preliminary preparations
  • 7.2 Formal measurement process
  • 7.3 Forward and reverse loading
  • 8 Evaluation parameters
  • 8.2 Weighted sound pressure level
  • 8.3 Cumulative sound pressure difference value
  • 8.4 Speech intelligibility index
  • 8.5 Total Loudness
  • 8.6 Sharpness
  • 9 Record

1 Foreword

TCSAE 50-2016 was issued by China Society of Automotive Engineers on 26 May 2016 and took effect the same day.

The TCSAE prefix marks a association standard, adopted voluntarily.

The document runs to 11 pages in English translation.

2 Scope Preview

This specification specifies the relevant definitions, principles, test equipment, test procedures, and tests for the test methods for the anti-concave performance of automotive exterior covers. Data processing method. This specification applies to passenger cars and light commercial vehicles, including body-in-white and related paint parts.

TCSAE 50-2016 falls under ICS 43.120, in the field of road vehicle engineering.

This catalogue holds 32 other TCSAE standards in that field.

In this catalogue, TCSAE standards carry edition years from 2015 to 2020.

3 About this standard

Issued by: China Society of Automotive Engineers

English translation: about 11 pages

Chinese original: about 16,157 characters

4 Related standards

Standards on related subjects:

QC/T 1029-2016 — Polypropylene (PP) honeycomb board products for automobiles

QC/T 797-2008 — Material identification and marking of automotive plastic, rubber and thermoplastic elastomer parts

5 Classification and status

International classification (ICS): 43.120

Chinese Standard Classification (CCS): T 40

Prefix TCSAE: association standard, adopted voluntarily.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.

How to Download TCSAE 50-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
11 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

TCSAE 50-2016

$210.00