TCSAE 42-2015Electric vehicles - unified diagnostic services specification over CAN bus (English PDF)
电动汽车CAN总线故障诊断规范
This is a limited preview
Buy now to download the full PDF (35 pages)
Need quotation for your management?
Get a formal quotation for TCSAE 42-2015 in 30 minutes.
Issued by
China Society of Automotive Engineers
Level / Type
National · Mandatory
Issue date
November 5, 2015
Implementation date
November 5, 2015
Scope
TCSAE 42-2015 is the English-translated version of 电动汽车CAN总线故障诊断规范.
TCSAE 42-2015 — This specification stipulates that the electric vehicle diagnostic equipment and the electric vehicle controller (not limited to the vehicle controller) are connected by CAN line.
Diagnostic abbreviations and diagnostic application layer services. This specification is applicable to online diagnosis of pure electric passenger vehicles. Wireless diagnosis can be used for reference.
Found what you need?
Document preview — TCSAE 42-2015
National Standard of the People's Republic of China
- ICS
- 43.040.01
- Classification
- T 47
Issued by: China Society of Automotive Engineers
Contents
- [Preview only]
- 1 Scope
- 1.1 Scope description
- 1.2 Application Notes
- 2 Normative references
- 3 Terms and definitions
- 3.2 Abbreviations
- 3.3 Symbols
- 4 Test conditions and requirements
- 4.1 Test environmental conditions
- 4.2 Instrumentation
- 4.3 Test equipment
- 4.4 Test requirements
- 4.5 Sealing material
- 4.6 Electrical transient conduction emission along the power line
- 4.7 Electromagnetic radiation immunity
- 4.8 Electrostatic discharge immunity
- 4.9 Magnetic field immunity
- 5 Test method
- 5.1 Basic requirements
- 5.2 Performance test
- 5.3 Safety test
- 5.4 Environmental adaptability test
- 5.5 EMC test
- 5.6 NVH test
- 5.7 Reliability test
- 5.8 Immunity of portable transmitter
- 5.9 Electrical transient conduction immunity along power lines
- 6 Test report and results
- 6.1 Overview
- 6.2 Seal position
- 6.3 Leakage noise of the whole vehicle
- 6.4 Local leakage noise
- 6.5 Basic principles of working condition formulation
- 6.6 Transmission gear selection
- 7 Test report
- 7.1 Preliminary preparations
- 7.2 Formal measurement process
- 7.3 Forward and reverse loading
- 8 Evaluation parameters
- 8.2 Weighted sound pressure level
- 8.3 Cumulative sound pressure difference value
- 8.4 Speech intelligibility index
- 8.5 Total Loudness
- 8.6 Sharpness
- 9 Record
1 Foreword
TCSAE 42-2015 was issued by China Society of Automotive Engineers on 5 November 2015 and took effect the same day.
The TCSAE prefix marks a association standard, adopted voluntarily.
The document runs to 35 pages in English translation.
2 Scope Preview
This standard specifies the communication protocol between the network layer and the application layer. It is mainly used for data monitoring, calibration, input/output control of electric vehicles, and reading of internal information of controllers. This standard elaborates on the network layer and application layer of the CAN bus fault diagnosis service for electric vehicles. For the network layer, data transmission rules, message types, addressing modes, diagnostic sessions, and the like are mainly specified. Diagnostic service applications are primarily specified for the application layer. The diagnostic service application includes a diagnostic management function unit, a data transmission function unit, a transmission and storage data function unit, an input/output control function unit, a remote function activation function unit, and an upload and download function unit. The diagnostic management function unit includes activating a diagnostic session service, a controller reset service, a secure access service, and a test online.
TCSAE 42-2015 falls under ICS 43.040.01, in the field of road vehicle engineering.
This catalogue holds 32 other TCSAE standards in that field.
In this catalogue, TCSAE standards carry edition years from 2015 to 2020.
3 Normative references
ISO 14229
ISO 15765
4 About this standard
Issued by: China Society of Automotive Engineers
English translation: about 35 pages
Chinese original: about 53,527 characters
5 Related standards
Standards on related subjects:
QC/T 247-2017 — Technical specifications for fuel gas systems of LPG vehicles
QC/T 245-2017 — Technical specifications for fuel gas systems of CNG vehicles
QC/T 674-2007 — Compressed natural gas solenoid valves for automobiles
6 Classification and status
International classification (ICS): 43.040.01
Chinese Standard Classification (CCS): T 47
Prefix TCSAE: association standard, adopted voluntarily.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 14229 · ISO 15765
How to Download TCSAE 42-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
TCSAE 143-2020 — Test and assessment specifications for integrated electric drive system of battery electric passenger cars
TCSAE 144-2020 — Energy efficiency level and test methods for drive motor system and electric drive assembly used on electric vehicles
TCSAE 145-2020 — Air conditioning system maximum cooling performance test procedure for passenger vehicle
TCSAE 42-2015
$540.00