TCSAE 41-2015Electric vehicles -- test and specification for vehicle control unit (English PDF)
电动汽车整车控制器测试评价规范
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for TCSAE 41-2015 in 30 minutes.
Issued by
China Society of Automotive Engineers
Level / Type
National · Mandatory
Issue date
November 5, 2015
Implementation date
November 5, 2015
Scope
TCSAE 41-2015 is the English-translated version of 电动汽车整车控制器测试评价规范.
TCSAE 41-2015 — This standard only specifies the test and evaluation method for the performance and reliability of the hardware controller of the electric passenger vehicle.
The purpose of this standard is to serve as the basis for the evaluation of the vehicle controller within the company. This specification applies to the evaluation of vehicle controllers based on electric vehicles and hybrid vehicles.
Found what you need?
Document preview — TCSAE 41-2015
National Standard of the People's Republic of China
- ICS
- 43.040.01
- Classification
- T 47
Issued by: China Society of Automotive Engineers
Contents
- [Preview only]
- 1 Scope
- 1.1 Scope description
- 1.2 Application Notes
- 2 Normative references
- 3 Terms and definitions
- 3.2 Abbreviations
- 3.3 Symbols
- 4 Test conditions and requirements
- 4.1 Test environmental conditions
- 4.2 Instrumentation
- 4.3 Test equipment
- 4.4 Test requirements
- 4.5 Sealing material
- 4.6 Electrical transient conduction emission along the power line
- 4.7 Electromagnetic radiation immunity
- 4.8 Electrostatic discharge immunity
- 4.9 Magnetic field immunity
- 5 Test method
- 5.1 Basic requirements
- 5.2 Performance test
- 5.3 Safety test
- 5.4 Environmental adaptability test
- 5.5 EMC test
- 5.6 NVH test
- 5.7 Reliability test
- 5.8 Immunity of portable transmitter
- 5.9 Electrical transient conduction immunity along power lines
- 6 Test report and results
- 6.1 Overview
- 6.2 Seal position
- 6.3 Leakage noise of the whole vehicle
- 6.4 Local leakage noise
- 6.5 Basic principles of working condition formulation
- 6.6 Transmission gear selection
- 7 Test report
- 7.1 Preliminary preparations
- 7.2 Formal measurement process
- 7.3 Forward and reverse loading
- 8 Evaluation parameters
- 8.2 Weighted sound pressure level
- 8.3 Cumulative sound pressure difference value
- 8.4 Speech intelligibility index
- 8.5 Total Loudness
- 8.6 Sharpness
- 9 Record
1 Foreword
TCSAE 41-2015 was issued by China Society of Automotive Engineers on 5 November 2015 and took effect the same day.
The TCSAE prefix marks a association standard, adopted voluntarily.
The document runs to 17 pages in English translation.
2 Scope Preview
This standard specifies the test and evaluation method for the hardware performance and reliability of the vehicle controller for electric passenger vehicles. It is used as the basis for evaluating the vehicle controller within the enterprise, and can also be applied to the whole based on electric vehicles and hybrid vehicles. Evaluation of the car controller. This standard makes five levels of distinction between the functional status of the electric vehicle complete vehicle controller, and gives five test contents of power supply test, short circuit test, environmental resistance performance test and electromagnetic compatibility performance test, which can be used for the vehicle controller. System performance testing and evaluation of hardware performance and reliability. Among them, the power supply test includes power supply voltage range test, leakage current test, power supply reverse connection test, over voltage test, voltage fluctuation test, voltage interruption test and other 6 items; short circuit test alone; environmental resistance test includes low temperature startability
TCSAE 41-2015 falls under ICS 43.040.01, in the field of road vehicle engineering.
This catalogue holds 32 other TCSAE standards in that field.
In this catalogue, TCSAE standards carry edition years from 2015 to 2020.
3 Normative references
GB/T 17619
ISO 10605
ISO 7637
ISO 11452
ISO 16750.1
ISO 16750.2
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.10-2008 — Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
GB/T 2423
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB/T 4365
4 About this standard
Issued by: China Society of Automotive Engineers
English translation: about 17 pages
Chinese original: about 25,299 characters
5 Related standards
Standards on related subjects:
QC/T 247-2017 — Technical specifications for fuel gas systems of LPG vehicles
QC/T 245-2017 — Technical specifications for fuel gas systems of CNG vehicles
QC/T 674-2007 — Compressed natural gas solenoid valves for automobiles
6 Classification and status
International classification (ICS): 43.040.01
Chinese Standard Classification (CCS): T 47
Prefix TCSAE: association standard, adopted voluntarily.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 17619Limits and methods of testing for immunity of electrical/electronic sub-assemblies in vehicles to electromagnetic radiation
- GB/T 2423.1-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.10-2008Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
- GB 4208-2008Degrees of Protection Provided By Enclosure (IP Code)
- GB/T 4365Electrotechnical terminology-Electromagnetic compatibility
ISO 10605 · ISO 7637 · ISO 11452 · ISO 16750.1 · ISO 16750.2 · GB/T 2423
How to Download TCSAE 41-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB/T 17619-1998 — Limits and methods of testing for immunity of electrical/electronic sub-assemblies in vehicles to electromagnetic radiation
GB/T 2423.1-1989 — Basic environmental testing procedures for electric and electronic products - Tests A: Cold
TCSAE 41-2015
$315.00