TB/T 3103.7-2005Cone-shaped bayonet ring couplings for rolling stock. Part 7: Tee couplings (English PDF)
机车车辆用锥面卡套式管接头 第7部分:三通管接头
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for TB/T 3103.7-2005 in 30 minutes.
Issued by
National Railway Administration
Level / Type
National · Recommended
Issue date
March 29, 2005
Implementation date
July 1, 2005
Scope
TB/T 3103.7-2005 is the English-translated version of 机车车辆用锥面卡套式管接头 第7部分:三通管接头.
TB/T 3103.7-2005 is the Chinese standard "Cone-shaped bayonet ring couplings for rolling stock. Part 7: Tee couplings". This standard provides specifications for DN6 ~ DN32 cone type tube fittings tube fittings of the structure, size, technical requirements and marking.
This standard applies to electric locomotives, diesel locomotives and vehicles air piping system. Issued on 2005-03-29, in force from 2005-07-01.
Found what you need?
Document preview — TB/T 3103.7-2005
National Standard of the People's Republic of China
- ICS
- 45.060.01
- Classification
- S34
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 3.1 Basic requirements
- 3.2 Material requirements
- 3.3 Structural requirements
- 3.4 Performance Requirements
- 4 Technical Requirements
- 4.1 Longitudinal rail restraint
- 4.2 Assembly clamping force
- 4.3 Fatigue performance of fastening assembly
- 4.4 Insulation performance
- 5 Test Methods
- 5.1 Type Inspection
- 5.2 End-of-manufacturing Inspection
- 6 Inspection Rules
- 6.1 Vertical Load Test
- 6.2 Longitudinal Compression Test
- 6.3 Longitudinal Tension Load Test
- 6.4 Torque Load Test
- 6.5 Rescue Strength Test (Single-head Lifting)
- 6.6 Safe Pressure Test of the Driver's Cab
- 6.7 Anti-collision Structure Pressure Test of the Driver's Cab
- 6.8 Cowcatcher Pressure Test
- 7 Marking, Packaging, Transportation and Storage
- 8 Test Equipment and Instruments
- 9 Strain Gage and Its Pasting and Wiring
- 9.1 Requirements of Measuring Gage
- 9.2 Requirements of Temperature Compensating Gage
- 9.3 Pasting Requirements of Strain Gage
- 9.4 Wiring Requirements of Strain Gage
- 9.5 Moisture-proof of Strain Gage
1 Foreword
TB/T 3103.7-2005 was issued by National Railway Administration on 29 March 2005 and has been in force since 1 July 2005.
It is one of 22 parts of the TB/T 3103 series.
The TB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard provides specifications for DN6 ~ DN32 cone type tube fittings tube fittings of the structure, size, technical requirements and marking. This standard applies to electric locomotives, diesel locomotives and vehicles air piping system.
TB/T 3103.7-2005 falls under ICS 45.060.01, in the field of railway engineering.
This catalogue holds 457 other TB/T standards in that field.
In this catalogue, TB/T standards carry edition years from 1973 to 2026.
3 About this standard
Sector: Railway & Train Industry Standard (Recommended)
Issued by: National Railway Administration
English translation: about 8 pages (approximate)
Chinese original: about 4,494 characters
4 Related standards
Other parts of this standard:
TB/T 3103.1-2005 — Part 1: Elastical ferruie
TB/T 3103.2-2005 — Part 2: Rubber sealing rings
TB/T 3103.3-2005 — Part 3: Straight couplings
TB/T 3103.4-2005 — Part 4: Straight coupling bodies
TB/T 3103.5-2005 — Part 5: Angle couplings
TB/T 3103.6-2005 — Part 6: Angle couplings bodies
TB/T 3103.8-2005 — Part 8: Tee coupling bodies
TB/T 3103.9-2005 — Part 9: Reducing straight couplings
TB/T 3103.10-2005 — Part 10: Reducing straight coupling bodies
TB/T 3103.11-2005 — Part 11: Intubatton straight couplings
TB/T 3103.12-2005 — Part 12: Intubatton straight coupling bodies
TB/T 3103.13-2005 — Part 13: Meter-pipe straight couplings
TB/T 3103.14-2005 — Part 14: Meter-pipe straight coupling bodies
TB/T 3103.15-2005 — Part 15: Cone thread straight couplings
TB/T 3103.16-2005 — Part 16: Cone thread straight coupling bodies
TB/T 3103.17-2005 — Part 17: Columned thread straight couplings
TB/T 3103.18-2005 — Part 18: Columned thread straight coupling bodies
TB/T 3103.19-2005 — Part 19: Cone thread angle couplings
TB/T 3103.20-2005 — Part 20: Cone thread angle coupling bodies
TB/T 3103.21-2005 — Part 21: Meter-pipe intubatton straight couplings
TB/T 3103.22-2005 — Part 22: Rubber O-rings
Standards on related subjects:
TB/T 1900-2016 — Air reservior of railway vehicle
TB/T 2983-2000 — Magnetic particle inspection of railroad wheels
TB/T 2995-2000 — Railway wheels and tires for ultrasonic inspection
TB/T 3560-2020 — Safety hammer for railway passenger car and EMU
TB/T 3108-2011 — Sliding plug door for railway passenger car
TB/T 3107-2011 — Unit combined windows for railway passenger car
5 Classification and status
International classification (ICS): 45.060.01
Chinese Standard Classification (CCS): S 34
Prefix TB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download TB/T 3103.7-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
TB/T 3103.8-2005 — Cone-shaped bayonet ring couplings for rolling stock. Part 8: Tee coupling bodies
TB/T 3103.6-2005 — Cone-shaped bayonet ring couplings for rolling stock. Part 6: Angle couplings bodies
TB/T 3103.9-2005 — Cone-shaped bayonet ring couplings for rolling stock. Part 9: Reducing straight couplings
TB/T 3103.7-2005
$85.00