TB/T 3103.19-2005Cone-shaped bayonet ring couplings for rolling stock. Part 19: Cone thread angle couplings (English PDF)
机车车辆用锥面卡套式管接头 第19部分:管锥直角管接头
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for TB/T 3103.19-2005 in 30 minutes.
Issued by
National Railway Administration
Level / Type
National · Recommended
Issue date
March 29, 2005
Implementation date
July 1, 2005
Scope
TB/T 3103.19-2005 is the English-translated version of 机车车辆用锥面卡套式管接头 第19部分:管锥直角管接头.
TB/T 3103.19-2005 is the Chinese standard "Cone-shaped bayonet ring couplings for rolling stock. Part 19: Cone thread angle couplings". Issued on 2005-03-29, in force from 2005-07-01.
Found what you need?
Document preview — TB/T 3103.19-2005
National Standard of the People's Republic of China
- ICS
- 45.060.01
- Classification
- S34
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 3.1 Basic requirements
- 3.2 Material requirements
- 3.3 Structural requirements
- 3.4 Performance Requirements
- 4 Technical Requirements
- 4.1 Longitudinal rail restraint
- 4.2 Assembly clamping force
- 4.3 Fatigue performance of fastening assembly
- 4.4 Insulation performance
- 5 Test Methods
- 5.1 Type Inspection
- 5.2 End-of-manufacturing Inspection
- 6 Inspection Rules
- 6.1 Vertical Load Test
- 6.2 Longitudinal Compression Test
- 6.3 Longitudinal Tension Load Test
- 6.4 Torque Load Test
- 6.5 Rescue Strength Test (Single-head Lifting)
- 6.6 Safe Pressure Test of the Driver's Cab
- 6.7 Anti-collision Structure Pressure Test of the Driver's Cab
- 6.8 Cowcatcher Pressure Test
- 7 Marking, Packaging, Transportation and Storage
- 8 Test Equipment and Instruments
- 9 Strain Gage and Its Pasting and Wiring
- 9.1 Requirements of Measuring Gage
- 9.2 Requirements of Temperature Compensating Gage
- 9.3 Pasting Requirements of Strain Gage
- 9.4 Wiring Requirements of Strain Gage
- 9.5 Moisture-proof of Strain Gage
1 Foreword
TB/T 3103.19-2005 was issued by National Railway Administration on 29 March 2005 and has been in force since 1 July 2005.
It is one of 22 parts of the TB/T 3103 series.
The TB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
TB/T 3103.19-2005 falls under ICS 45.060.01, in the field of railway engineering.
This catalogue holds 457 other TB/T standards in that field.
In this catalogue, TB/T standards carry edition years from 1973 to 2026.
3 About this standard
Sector: Railway & Train Industry Standard (Recommended)
Issued by: National Railway Administration
English translation: about 8 pages (approximate)
Chinese original: about 4,425 characters
4 Related standards
Other parts of this standard:
TB/T 3103.1-2005 — Part 1: Elastical ferruie
TB/T 3103.2-2005 — Part 2: Rubber sealing rings
TB/T 3103.3-2005 — Part 3: Straight couplings
TB/T 3103.4-2005 — Part 4: Straight coupling bodies
TB/T 3103.5-2005 — Part 5: Angle couplings
TB/T 3103.6-2005 — Part 6: Angle couplings bodies
TB/T 3103.7-2005 — Part 7: Tee couplings
TB/T 3103.8-2005 — Part 8: Tee coupling bodies
TB/T 3103.9-2005 — Part 9: Reducing straight couplings
TB/T 3103.10-2005 — Part 10: Reducing straight coupling bodies
TB/T 3103.11-2005 — Part 11: Intubatton straight couplings
TB/T 3103.12-2005 — Part 12: Intubatton straight coupling bodies
TB/T 3103.13-2005 — Part 13: Meter-pipe straight couplings
TB/T 3103.14-2005 — Part 14: Meter-pipe straight coupling bodies
TB/T 3103.15-2005 — Part 15: Cone thread straight couplings
TB/T 3103.16-2005 — Part 16: Cone thread straight coupling bodies
TB/T 3103.17-2005 — Part 17: Columned thread straight couplings
TB/T 3103.18-2005 — Part 18: Columned thread straight coupling bodies
TB/T 3103.20-2005 — Part 20: Cone thread angle coupling bodies
TB/T 3103.21-2005 — Part 21: Meter-pipe intubatton straight couplings
TB/T 3103.22-2005 — Part 22: Rubber O-rings
Standards on related subjects:
TB/T 1900-2016 — Air reservior of railway vehicle
TB/T 2983-2000 — Magnetic particle inspection of railroad wheels
TB/T 2995-2000 — Railway wheels and tires for ultrasonic inspection
TB/T 3560-2020 — Safety hammer for railway passenger car and EMU
TB/T 3108-2011 — Sliding plug door for railway passenger car
TB/T 3107-2011 — Unit combined windows for railway passenger car
5 Classification and status
International classification (ICS): 45.060.01
Chinese Standard Classification (CCS): S 34
Prefix TB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download TB/T 3103.19-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
TB/T 3103.20-2005 — Cone-shaped bayonet ring couplings for rolling stock. Part 20: Cone thread angle coupling bodies
TB/T 3103.18-2005 — Cone-shaped bayonet ring couplings for rolling stock. Part 18: Columned thread straight coupling bodies
TB/T 3103.21-2005 — Cone-shaped bayonet ring couplings for rolling stock. Part 21: Meter-pipe intubatton straight couplings
TB/T 3103.19-2005
$85.00