Valid

T/CSAE 70-2018The sunlight simulation accelerated aging test method for the passenger vehicle (English PDF)

乘用车整车太阳光模拟加速老化试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (10 pages)

Need quotation for your management?

Get a formal quotation for T/CSAE 70-2018 in 30 minutes.

Issued by

China Society of Automotive Engineers

Level / Type

National · Mandatory

Issue date

March 1, 2018

Implementation date

March 1, 2018

Scope

T/CSAE 70-2018 is the English-translated version of 乘用车整车太阳光模拟加速老化试验方法.

T/CSAE 70-2018 — The sunlight simulation accelerated aging test method for the passenger vehicle

Found what you need?

Document preview — T/CSAE 70-2018

National Standard of the People's Republic of China

Classification
T 40

Issued by: China Society of Automotive Engineers

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Hot-dry climate
  • 3.2 Warm-wet climate
  • 3.3 Sunlight simulation accelerated aging test for the complete vehicle
  • 4 Test equipment
  • 4.1 Test chamber
  • 4.2 Acquisition equipment
  • 5 Test samples
  • 5.1 Test prototype vehicle
  • 5.1.1 Color requirements for prototype vehicle
  • 5.1.2 State requirements for prototype vehicle
  • 5.2 Reference samples
  • 6 Test period and conditions
  • 6.1 Hot-dry climate cycle test
  • 6.1.1 Conditions
  • 6.1.2 Conditions of single hot-dry climate cycle test
  • 6.2 Warm-wet climate cycle test
  • 6.2.1 Conditions
  • 6.2.2 Conditions of single warm-wet climate cycle test
  • 7 Test procedure
  • 7.1 Test preparation
  • 7.1.1 Vehicle inspection prior to test
  • 7.1.2 Installation of acquisition equipment
  • 7.1.3 Initial performance inspection
  • 7.2 Test procedure
  • 7.3 Inspection at end of test
  • 8 Test report

1 Foreword

T/CSAE 70-2018 was issued by China Society of Automotive Engineers on 1 March 2018 and took effect the same day.

Some of the elements of this standard may be the subject of patent rights. The issuing authority of this standard shall not be held responsible for identifying any or all such patent rights.

This standard was proposed by the C&AP Committee of SAE-China.

This standard is approved by the Society of Automotive Engineering of China.

This standard is under the jurisdiction of the Society of Automotive Engineering of China.

This standard was issued in March 2018 for the first time.

2 Scope Preview

This standard specifies the test equipment, test samples, test period and conditions as well as test process for the sunlight simulation accelerated aging test for passenger vehicles. It is applicable to the sunlight simulation accelerated aging test for passenger vehicles under the simulated environment conditions in the laboratory.

T/CSAE 70-2018 is filed under Chinese Standard Classification T 40, in the field of vehicles.

This catalogue holds 44 other T/CSAE standards without an ICS number.

In this catalogue, T/CSAE standards carry edition years from 2015 to 2020.

3 Normative references

GB/T 250 — Textiles - Tests for color fastness - Grey scale for assessing change in color

GB/T 1766 — Paints and varnishes - Rating schemes of degradation of coats

GB/T 8424.3 — Textile - Tests for colour fastness - Calculation of colour differences

GB/T 8807 — Test method for specular gloss of plastics

GB/T 9754 — Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60°and 80°

GB/T 15596 — Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources

4 About this standard

Issued by: China Society of Automotive Engineers

English translation: about 10 pages

Chinese original: about 15,130 characters

5 Related standards

Standards on related subjects:

QC/T 1029-2016 — Polypropylene (PP) honeycomb board products for automobiles

QC/T 797-2008 — Material identification and marking of automotive plastic, rubber and thermoplastic elastomer parts

6 Classification and status

Chinese Standard Classification (CCS): T 40

Prefix T/CSAE: association standard, adopted voluntarily.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 10 pages — is available in the English PDF.

How to Download T/CSAE 70-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
10 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

T/CSAE 70-2018

$105.00