T/CSAE 56-2017Bulletproof steel sheet and strip for automobile use (English PDF)
汽车用防弹钢板和钢带
This is a limited preview
Buy now to download the full PDF (14 pages)
Need quotation for your management?
Get a formal quotation for T/CSAE 56-2017 in 30 minutes.
Issued by
China Society of Automotive Engineers
Level / Type
National · Mandatory
Issue date
November 3, 2017
Implementation date
November 3, 2017
Scope
T/CSAE 56-2017 is the English-translated version of 汽车用防弹钢板和钢带.
T/CSAE 56-2017 — This standard specifies the grades, uses, composition, shape, dimensions, surface quality, performance, inspection and testing, packaging marks, quality specifications, etc. of bulletproof steel sheets and strips for automobiles.
Found what you need?
Document preview — T/CSAE 56-2017
National Standard of the People's Republic of China
- ICS
- 43.120
- Classification
- T 40
Issued by: China Society of Automotive Engineers
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Classification and code
- 4 Grades, types and applications
- 5 Requirements
- 5.1 Production process conditions
- 5.2 Chemical composition
- 5.3 Delivery status
- 5.4 Mechanical properties
- 5.5 Anti-elasticity
- 5.6 Dimension, shape, weight and tolerance
- 5.6.1 Standard thickness specifications
- 5.6.2 Dimensional accuracy
- 5.6.3 Plate shape
- 5.6.4 Weight
- 5.7 Microstructure
- 5.8 Surface quality
- 6 Quality inspection and testing
- 6.1 Inspection responsibility
- 6.2 Inspection regulations
- 6.2.1 Inspection category
- 6.2.2 Batch rules
- 6.2.3 Inspection items, categories, sampling quantity and requirements
- 6.2.4 Re-inspection and judgment rules
- 6.3 Inspection methods
- 6.3.1 Chemical composition inspection
- 6.3.2 Metallographic test
- 6.3.3 Tensile test
- 6.3.4 Bend test
- 6.3.5 Hardness test
- 6.3.6 Anti-elasticity test
- 6.3.7 Appearance and surface quality inspection
- 6.3.8 Dimensions
- 6.3.9 Ultrasonic inspection
- 7 Numerical rounding rules
Foreword
In order to meet the design and development needs of China 's national defense bulletproof car products, according to the production of hot rolled bulletproof steel plates and steel belts for automobiles at home and abroad, with reference to the current development status of bulletproof steel of foreign advanced enterprises such as SSAB, combined with the actual situation in the country, according to the rules given in GB/T 1.1-2009.
Appendices A and C of this standard are normative appendixes, and appendixes B and D are informative appendixes.
This standard is proposed by the Automotive Lightweight Technology Innovation Strategic Alliance.
This standard was approved by the Chinese Society of Automotive Engineers.
This standard was first issued in November.2017.
4 Grades, types and uses
The steel plate and steel strip are distinguished according to their uses as shown in Table 1.
Table 1 Grades and uses of steel plates and strips
Types of steel
SHR900FD (1) Hot rolled material SHR900FD (1) thickness 3.00mm, A, for Class B Protected Vehicles SHR900FD (2) Hot rolled material SHR900FD (2) thickness 3.00mm, A, for Class B Protected Vehicles SHT1600FD Heat-treated material Class B protective vehicle SHT1900FD Heat-treated material for Class C protective vehicles
5 Requirements
5.1 Production process conditions
Steel plates and strips should be produced by arc furnace or converter smelting, refining outside the furnace, vacuum degassing (VD or RH), and heat treatment it is recommended to use flat die pressure quenching to obtain a fully martensitized matrix structure. The relevant heat treatment process parameters are based on product size, Product user performance requirements, supplier technical conditions and so on. In addition, after consultation between the supply and demand sides, it can also be used to ensure the quality of this standard.
Other production processes and process methods required and specified in the contract.
5.2 Chemical composition
The chemical composition of each steel grade should meet the requirements of Tables 2 and 3. If the purchaser proposes more stringent requirements, it should negotiate with the supplier.
It shall be agreed upon in the contract and specified in the contract. The supplier shall produce and supply the product in accordance with the stricter requirements of the contract. Steel mills are also available in this Based on the standard composition control requirements, it is subdivided to form the corresponding steel seed grade series. In addition, after consultation between the supply and demand parties, Under the premise of relevant product quality requirements of this standard, other alloy composition designs can also be used.
Table 2 Composition requirements for hot-rolled bulletproof steel plates and strips
the unit is%
Grade
chemical composition C Si Mn PS Ti Cr Cu Mo Ni V Nb Al SHR900FD (1) 0.15 ~ 0.20 0.60 0.80 1.50 2.00 <= 0.025 <= 0.010 <= 0.15 0.20 ~ 0.30 0.20 ~ 0.30 0.15 ~ 0.20 0.15 ~ 0.25 <= 0.10 SHR900FD (2) 0.17 ~ 0.21 0.60 0.80 1.50 2.00 <= 0.025 <= 0.010 <= 0.15 0.20 ~ 0.30 0.20 ~ 0.30 0.15 ~ 0.20 0.15 ~ 0.25 <= 0.10 Note. The allowable deviation of the chemical composition of the finished steel product shall meet the requirements of GB/T 222.
14173-Bulletproof steel plate and steel belt for automobile.indd 2.2017/11/7 9.58.28
Table 3 Composition requirements for heat-treated bulletproof steel plates and strips
the unit is%
Grade
chemical composition C Si Mn PS Al Cr Ni Ti VB SHT1600FD 0.27 ~ 0.32 0.28 ~ 0.34 1.10 ~ 1.20 <= 0.025 <= 0.010 >= 0.020 0.70 ~ 0.80 0.30 ~ 0.38 <= 0.20 <= 0.05 0.0015 ~ 0.0035 SHT1900FD 0.36 ~ 0.42 0.31 ~ 0.37 1.15 ~ 1.25 <= 0.025 <= 0.010 >= 0.020 0.70 ~ 0.80 0.30 ~ 0.38 <= 0.20 <= 0.05 0.0015 ~ 0.0035 Note. The allowable deviation of the chemical composition of the finished steel product shall meet the requirements of GB/T 222.
5.3 Delivery status
Delivery in hot rolled or heat treated state.
Can be negotiated between the supplier and the buyer to determine whether the product needs to be pickled (shot blasted), oiled and rust-proofed before the product is delivered, and it is stated in the supply contract.
5.4 Mechanical properties
The range of mechanical properties and process performance indicators shall meet the requirements specified in Table 4.
Table 4 Range of mechanical properties and process performance indicators
Grade yield strength ReL/MPa Tensile strength Rm/MPa Rockwell hardness/HRB Brinell hardness/HB Elongation after breaking /% 180 ° cold roll A80 A50 SHR900FD (1) >= 700 >= 900 27 ~ 35 270 ~ 330 >= 9 >= 13 D = a SHR900FD (2) >= 700 >= 900 27 ~ 35 270 ~ 330 >= 9 >= 13 D = a SHT1600FD >= 1100 >= 1600 49 ~ 52 470 ~ 520 >= 6 >= 8 SHT1900FD >= 1300 >= 1900 54 ~ 57 550 ~ 600 >= 4 >= 6
Note 1. The bending test parameter D is the bending indenter diameter (mm), and a is the specimen thickness (mm).
Note 2. The tensile test and bending test are transverse samples, the tensile sample L is 80 mm or 50 mm, b is 20 mm, and the width of the bending sample is >= 35 mm; the rest are the dimensions shall meet the requirements of GB/T 228.1 and GB/T 232. In addition, when the material yield phenomenon is not obvious, Rp0.2 should be used instead of ReL.
5.5 Anti-elasticity
Each batch of steel plate and steel strip products shall be subjected to a shooting range test to assess its anti-elastic performance.
Please refer to Appendix C for inspection methods and evaluation standards.
5.6 Dimension, shape, weight and tolerance
5.6.1 Standard thickness specifications
The nominal thickness specifications of steel plates and strips can be implemented by referring to the requirements of SAE-China J2205-2013 (Table 5).
14173-Bulletproof steel plate and steel belt for automobile.indd 3.2017/11/7 9.58.28 14173-Bulletproof steel plate and steel belt for automobile.indd 4.2017/11/7 9.58.28 14173-Bulletproof steel plate and steel belt for automobile.indd 5.2017/11/7 9.58.28
Table 8 Product inspection requirements
No. Inspection item Inspection category Sampling quantity Sampling method
1 Shape and size must be inspected
2 Surface quality must be inspected 3 chemical composition must be tested 3/furnace according to GB/T 222
4 Microstructures must be inspected 3 pieces/sheet according to GB/T 13298 Mechanics performance Stretching must be checked 3 pieces/sheet According to GB/T 2975 (transverse sampling) Bending must be inspected 3 Brinell hardness (HB) must be tested 3 pieces/sheet according to GB/T 231.1 Rockwell hardness (HRB) must be tested 3 pieces/sheet according to GB/T 230
6 Anti-elasticity must be inspected 3 pieces
7 Ultrasonic inspection
Note. Ultrasound is an unconventional inspection item, which can be determined by the buyer, and the inspection report can be selected only when the material is certified or first delivered, in the actual supply process, random inspection or batch-by-batch inspection is implemented. Test points corresponding to each hardness test sample >= 3 points
6.2.4 Re-inspection and judgment rules when the chemical composition analysis result of the product is unsatisfactory, re-sampling is allowed to analyze the unqualified elements.
The batch of steel was judged to be unqualified.
When the sample tensile, bending, and hardness inspections are performed in accordance with the requirements of Table 8, if any of the inspection results do not meet the requirements of Table 4, it can be judged that the mechanical properties of this batch of products are unqualified. When the product mechanical properties inspection fails, it is allowed to take Double inspections are carried out for re-inspection. Even if one of the re-inspection results fails, the batch of steel can be judged as unqualified. Heat-treated steel Sheets and strips are allowed to be submitted for inspection after reheating.
When the product's anti-elasticity test fails, whether to carry out re-inspection shall be determined by the supplier and the buyer through consultation.
Double the number of samples. Single-speed testing should be performed before retesting, and retesting should be performed after the speed test is qualified. If there is one recheck If it fails, the batch of steel can be judged as unqualified. For heat-treated steel plates and strips, inspection is allowed after re-heat treatment. weight the new heat treatment allows only one quenching, and the number of tempering is unlimited. It is confirmed that the test results are not caused by the test conditions and test methods.
The supplier shall be fully responsible for the nonconforming product.
When the product appearance, dimensions, surface quality and other inspections are unqualified, the leaflet is judged as unqualified, and the unqualified
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.
How to Download T/CSAE 56-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
T/CSAE 124.1-2020 — Automotive variable-displacement pendulum oil pump - Terminology
T/CSAE 124.2-2020 — Automotive variable-displacement pendulum oil pump - technical specification Drafting
T/CSAE 124.3-2020 — Automotive variable-displacement pendulum oil pump - Test method and device
T/CSAE 56-2017
$235.00