T/CSAE 55-2017Relaxation resistance test method of automobile spring steel (English PDF)
汽车弹簧钢松弛抗力试验方法
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for T/CSAE 55-2017 in 30 minutes.
Issued by
China Society of Automotive Engineers
Level / Type
National · Mandatory
Issue date
November 3, 2017
Implementation date
November 3, 2017
Scope
T/CSAE 55-2017 is the English-translated version of 汽车弹簧钢松弛抗力试验方法.
T/CSAE 55-2017 — This standard specifies the definition, principle, test sample, test equipment, test procedure, data processing and test report of the automotive spring steel relaxation resistance test method.
Found what you need?
Document preview — T/CSAE 55-2017
National Standard of the People's Republic of China
- ICS
- 43.120
- Classification
- T 40
Issued by: China Society of Automotive Engineers
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Test principle
- 5 Sample
- 6 Test equipment
- 6.1 Test system
- 6.2 Extensometer
- 6.3 Sensor
- 6.4 Fixtures and fixtures
- 7 Test process
- 7.1 General
- 7.2 Cyclic loading
- 7.3 Forward and reverse loading
- 8 Data processing
- 8.1 Cyclic Loading Data Processing
- 8.1.1 Pre-strain total energy consumption EP
- 8.1.2 Relaxation Index ETC
- 8.2 Forward and reverse loading data processing
- 8.2.1 Total energy consumption E'P in forward loading
- 8.2.2 Bauschinger strain beta
- 8.2.3 Bauschinger Effect Energy ES
- 8.2.4 Mean Bauschinger strain ABS
- 8.2.5 BEEPINGER Effect Energy Parameter BEEP
- 9 Test report
- Appendix A (informative) Example of compressive and tensile specimen dimensions
Foreword
This standard is prepared in accordance with the rules given in GB/T 1.1-2009.
Appendix A of this standard is an informative appendix.
This standard was proposed by the Material Branch of the Chinese Society of Automotive Engineers.
This standard was approved by the Chinese Society of Automotive Engineers.
This standard was first issued in November.2017.
4 Test principle
For automotive spring steel, people are more concerned about the mechanical properties of the material under tension and compression. Bauschinger effect of materials Quality is the directionality of dislocation resistance. When the forward deformation, as the strain increases, the flow stress increases;
The variable stress decreases, and the macroscopic performance is the Bauschinger effect. For elastic components, it is the embodiment and characterization of the relaxation resistance. So the package the magnitude of each parameter of the Singh effect also largely reflects the relaxation resistance of the material.
sigmap
-sigmap
g ETC = FG
epsilonp
epsilon0
Figure 1 Schematic diagram of the Bauschinger effect parameters and ETT
14179-Test method for automobile spring steel relaxation resistance.indd 2.2017/11/7 9.58.36 According to the relevant definition of the Bauschinger effect of a material, we can obtain the following Bauschinger effect parameters.
a) the strain characterized by the Bauschinger strain beta-line DE;
b) ESC-BDE area of Bauschinger;
c) Relaxation resistance index. ETC . The larger the value, the better the material's resistance to relaxation.
5 Sample
In order to prevent the sample from being unstable during the tensile and compression test, the sample is processed into a short gauge rod-shaped sample, and the aspect ratio of the gauge section of the sample is <= 2, After processing, the surface of the sample is smooth and no visible scratches.
The specific size is determined according to the material specifications. Appendix A is a reference case for the tensile and compression sample size.
6 Test equipment
6.1 Test system
The testing machine should be able to provide the axial test force and minimize the bending moment and torque generated on the sample;
The test force shall be applied smoothly to the specimen;
The force measuring system of the testing machine is calibrated according to GB/T 16825.1-2008, and its accuracy is level 1 or better. Can pull the material test system for the compression test shall be capable of fully recording the stress-strain curve during the loading and unloading process.
6.2 Extensometer
The extensometer required for the relaxation resistance test should have sufficient resolution to ensure that sufficient tests are recorded throughout the test Data, the specification of the extensometer should be consistent with the dimension of the parallel end of the sample.
12160 Class 1 or better accuracy requirements.
6.3 Sensor
The load and displacement sensors or other recording equipment used in the relaxation resistance test should have sufficient resolution to ensure that Record sufficient test data during the inspection. The recommended load sensor or other recording device should have a resolution of 1 N or better, the load and displacement sensors meet the accuracy requirements of Class 1 or better than GB/T 16825.1 and GB/T 12160.
6.4 Fixtures and fixtures
Fixtures and fixtures shall ensure the test principle and obtain accurate results of material relaxation resistance evaluation.
7 Test process
7.1 General
The test load of automobile spring steel for relaxation resistance includes a cyclic loading and a forward and reverse loading. Cyclic loading process. forward Strain loading-unloading to zero-reloading to flow stress >= sigmaP; forward and reverse loading process. forward pre-strain loading-unloading to zero-Reverse loading until the absolute value of rheological strain >= sigmaP. Record the rheological curves during the above loading process to determine and calculate the relevant Bauschinger 14179-Test method for automobile spring steel relaxation resistance.indd 3.2017/11/7 9.58.36 14179-Test method for relaxation resistance of automotive spring steel.indd 4.2017/11/7 9.58.36 14179-Test method for automotive spring steel relaxation resistance.indd 5.2017/11/7 9.58.36 the stress-strain curve is shown in Figure 4. The reverse loading line is the BE curve. After passing point B, it is an extension of the AB straight line.
The horizontal line intersects at point D, where the length of ED is the Bauschinger strain beta; the total energy consumption E'P of the pre-strain under forward loading is shown in Figure 4 a).
The total energy consumption EBEE ' in reverse loading is shown in Figure 4 b). BDEE ' trapezoidal area EBDEE ', which is the reverse loading effect energy and the Bauschinger effect energy the sum is shown in Figure 4 c). The calculation method of the curve enclosing area uses the principle of calculus to approximate the adjacent data points into a trapezoid.
Based on the stress-strain data, the area of each trapezoid is obtained, and then summed to obtain the enclosed area of the curve, as shown in Figure 3.
EBEE ' EBDEE '
ggg
E ' epsilonP
sigmaP
-sigmaP
sigma sigma
epsilon
beta beta
0 0B B
D DE E
E ' E'epsilonP epsilonP sigmaP sigmaP-sigmaP -sigmaP
b) EBEE ' for reverse loading energy c) BDEE ' trapezoidal area EBDEE ' a) total energy consumption for forward loading E ' P
Figure 4 Data processing parameters of forward and reverse loading curve
8.2.1 Total energy consumption E'P in forward loading
Total forward energy E'P can be calculated from the stress-strain curve of forward pre-strain loading. E'P can be characterized as a unit body.
The total energy consumption of the pre-strain loading of the product is shown in Figure 4 a). The area enclosed by the curve is the value of E'P. It can be obtained by discrete superposition of each data point.
The position is MPa ·%. By comparing with the EP value in 8.1.1, the stability of the repeatability test data of the sample is examined.
8.2.2 Bauschinger strain beta
The length of the straight line DE in Figure 4 a) is the Bauschinger strain beta, which represents the plastic strain when the flow stress of the sample under reverse loading is -sigmaP.
the unit is%.
8.2.3 Bauschinger Effect Energy ES
The Bauschinger effect energy ES can be used to represent the energy saving during the reverse loading process, as shown in Fig. 4 b) and Fig. 4 c).
The area enclosed by the straight lines BD and DE can be obtained by subtracting the total reverse energy consumption EBEE ' from the area of the trapezoidal BDEE ', that is, ES = EBEE'-EBDEE ', the unit is MPa ·%.
8.2.4 Mean Bauschinger Strain ABS
The average Bauschinger strain was calculated according to the formula ABS = ES/sigmap.
8.2.5 BEEPINGER EFFECT ENERGY PARAMETERS BEEP
The Bauschinger effect energy parameter is calculated according to the formula BEEP = ES/E'P.
14179-Test method for relaxation resistance of automobile spring steel.indd 6.2017/11/7 9.58.37
9 Test report
The test report format can be designed by itself and should include the following main contents.
a) test method;
b) the grade, specification and condition of the test material;
c) sample geometry and size;
d) Sample heat treatment process;
e) Test loading method and loading speed;
f) load-displacement or stress-strain curve;
g) Total forward prestrain energy EP and E'P, relaxation strength ETT, Bauschinger strain beta, Bauschinger effect energy ES, average Bauschinger Strain ABS, Bauschinger effect energy parameter BEEP;
h) Test date.
14179-Test method for relaxation resistance of automobile spring steel.indd 7.2017/11/7 9.58.37 14179-Test method for relaxation resistance of automotive spring steel.indd 8.2017/11/7 9.58.37
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
How to Download T/CSAE 55-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
T/CSAE 124.1-2020 — Automotive variable-displacement pendulum oil pump - Terminology
T/CSAE 124.2-2020 — Automotive variable-displacement pendulum oil pump - technical specification Drafting
T/CSAE 124.3-2020 — Automotive variable-displacement pendulum oil pump - Test method and device
T/CSAE 55-2017
$175.00