T/CSAE 48-2016Test method of surface waviness for automotive steel sheet (English PDF)
汽车用薄钢板表面波纹度试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for T/CSAE 48-2016 in 30 minutes.
Issued by
China Society of Automotive Engineers
Level / Type
National · Mandatory
Issue date
February 28, 2016
Implementation date
February 28, 2016
Scope
T/CSAE 48-2016 is the English-translated version of 汽车用薄钢板表面波纹度试验方法.
T/CSAE 48-2016 — This standard specifies the terms and definitions, samples and their preparation, test equipment, test procedures, data processing, and test report contents in the test method for surface waviness of steel sheets for automobiles.
Found what you need?
Document preview — T/CSAE 48-2016
National Standard of the People's Republic of China
- ICS
- 43.120
- Classification
- T 40
Issued by: China Society of Automotive Engineers
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General
- 4.2 Materials
- 4.3 Performance requirements
- 4.4 Product reliability
- 4.5 Product cleanliness
- 5 Test method
- 5.1 Equipment materials
- 5.2 Test chamber
- 5.3 Scratch Knife
- 5.4 Performance test
- 5.5 Test method for water jet nozzle and water gun
- 5.6 Immersion test method
- 5.8 Other
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type test
- 6.3 Reference sample storage
- 6.4 Sample cleaning
- 6.5 Status adjustment
- 6.6 Edge banding
- 6.7 Aging rating of uncoated metal parts
- 7 Identification, packaging, transportation, storage
- 7.1 Identification
- 7.2 Packaging
- 7.3 Transport
- 7.4 Storage
- 8 Test procedure
- 8.1 Handling of the sample after the test
- 8.2 Evaluation of test results
- 8.3 Detection method
- 9 Test report
- 9.1 Description of test report
- 9.2 Test report content requirements
- 9.3 Requirements for standard samples
1 Foreword
T/CSAE 48-2016 was issued by China Society of Automotive Engineers on 28 February 2016 and took effect the same day.
The T/CSAE prefix marks a association standard, adopted voluntarily.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the terms and definitions, samples and their preparation, test equipment, test procedures, data processing, and test report contents in the test method for surface waviness of steel sheets for automobiles. This standard is applicable to the following aspects of the surface waviness test for automotive sheet steel: incoming inspection of automotive sheet steel raw materials, selection of new product design, approval of new automotive sheet materials, material technology cost reduction materials and surface waviness ratio For the test.
T/CSAE 48-2016 falls under ICS 43.120, in the field of road vehicle engineering.
This catalogue holds 51 other T/CSAE standards in that field.
In this catalogue, T/CSAE standards carry edition years from 2015 to 2020.
3 About this standard
Issued by: China Society of Automotive Engineers
English translation: about 15 pages
Chinese original: about 22,255 characters
4 Related standards
Standards on related subjects:
QC/T 1029-2016 — Polypropylene (PP) honeycomb board products for automobiles
QC/T 797-2008 — Material identification and marking of automotive plastic, rubber and thermoplastic elastomer parts
5 Classification and status
International classification (ICS): 43.120
Chinese Standard Classification (CCS): T 40
Prefix T/CSAE: association standard, adopted voluntarily.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download T/CSAE 48-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
T/CSAE 124.1-2020 — Automotive variable-displacement pendulum oil pump - Terminology
T/CSAE 124.2-2020 — Automotive variable-displacement pendulum oil pump - technical specification Drafting
T/CSAE 124.3-2020 — Automotive variable-displacement pendulum oil pump - Test method and device
T/CSAE 48-2016
$270.00