T/CSAE 134-2020Aging resistance of automobile - Outdoor accelerated weathering test method of exposure with solar tracking concentration apparatus (English PDF)
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for T/CSAE 134-2020 in 30 minutes.
Issued by
China Society of Automotive Engineers
Level / Type
National · Mandatory
Issue date
May 29, 2020
Implementation date
May 29, 2020
Scope
T/CSAE 134-2020 (Aging resistance of automobile - Outdoor accelerated weathering test method of exposure with solar tracking concentration apparatus) is available as an English-translated PDF.
T/CSAE 134-2020 — This standard specifies the terms and definitions of the Fresnel reflection system using the sun as the light source for the accelerated aging test of automotive exterior materials.
Test site requirements, equipment, safety precautions, samples, test procedures and results. This standard is applicable to the Fresnel reflection system using the sun as the light source for accelerated aging test of automotive exterior materials.
The equipment and methods specified in this standard can be used to determine the relative aging resistance of automotive materials exposed to sunlight, heat and humidity, provided that it is assumed that the mechanism of physical and chemical changes that decisively affect the accelerated aging rate of the material during the test has not changed.
The test results of this standard can be used to compare the relative aging resistance of automotive exterior materials that have undergone a specific cycle test.
Any accelerated exposure the exposure test cannot be regarded as a complete simulation of natural or on-site exposure, only when the performance level of the tested material can be used for comparison After it has been determined, the test results of this standard can be regarded as representative of the results of natural or on-site exposure tests.
Found what you need?
Document preview — T/CSAE 134-2020
National Standard of the People's Republic of China
- ICS
- 43.020
- Classification
- T 40
Issued by: China Society of Automotive Engineers
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 2.1 Terms
- 3 Terms and definitions
- 4 Test site requirements
- 5 Equipment
- 6 Safety precautions
- 7 Specimen
- 8 Test procedure
- 8.1 Handling of the sample after the test
- 8.2 Evaluation of test results
- 8.3 Detection method
- 9 Report
- 9.1 Description of test report
- 9.2 Test report content requirements
- 9.3 Requirements for standard samples
1 Foreword
T/CSAE 134-2020 was issued by China Society of Automotive Engineers on 29 May 2020 and took effect the same day.
The T/CSAE prefix marks a association standard, adopted voluntarily.
The document runs to 7 pages in English translation.
2 Scope Preview
This standard specifies the terms and definitions of the Fresnel reflection system using the sun as the light source for the accelerated aging test of automotive exterior materials. Test site requirements, equipment, safety precautions, samples, test procedures and results. This standard is applicable to the Fresnel reflection system using the sun as the light source for accelerated aging test of automotive exterior materials. The equipment and methods specified in this standard can be used to determine the relative aging resistance of automotive materials exposed to sunlight, heat and humidity, provided that it is assumed that the mechanism of physical and chemical changes that decisively affect the accelerated aging rate of the material during the test has not changed. The test results of this standard can be used to compare the relative aging resistance of automotive exterior materials that have undergone a specific cycle test. Any accelerated exposure the exposure test cannot be regarded as a complete simulation of natural or on-site exposure, only when the performance level of the tested material can be used for comparison After it has been determined, the test results of this standard can be regarded as representative of the results of natural or on-site exposure tests.
T/CSAE 134-2020 falls under ICS 43.020, in the field of road vehicle engineering.
This catalogue holds 51 other T/CSAE standards in that field.
In this catalogue, T/CSAE standards carry edition years from 2015 to 2020.
3 About this standard
Issued by: China Society of Automotive Engineers
English translation: about 7 pages
Chinese original: about 10,175 characters
4 Related standards
Standards on related subjects:
QC/T 1029-2016 — Polypropylene (PP) honeycomb board products for automobiles
QC/T 797-2008 — Material identification and marking of automotive plastic, rubber and thermoplastic elastomer parts
5 Classification and status
International classification (ICS): 43.020
Chinese Standard Classification (CCS): T 40
Prefix T/CSAE: association standard, adopted voluntarily.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
How to Download T/CSAE 134-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
T/CSAE 124.1-2020 — Automotive variable-displacement pendulum oil pump - Terminology
T/CSAE 124.2-2020 — Automotive variable-displacement pendulum oil pump - technical specification Drafting
T/CSAE 124.3-2020 — Automotive variable-displacement pendulum oil pump - Test method and device
T/CSAE 134-2020
$244.00