Valid

T/CSAE 131-2020The guideline of drainage and sealing design of sedan body in white for anticorrosion (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (14 pages)

Need quotation for your management?

Get a formal quotation for T/CSAE 131-2020 in 30 minutes.

Issued by

China Society of Automotive Engineers

Level / Type

National · Mandatory

Issue date

May 29, 2020

Implementation date

May 29, 2020

Scope

T/CSAE 131-2020 (The guideline of drainage and sealing design of sedan body in white for anticorrosion) is available as an English-translated PDF.

T/CSAE 131-2020 — This standard specifies the design steps for anti-corrosion, drainage and sealing of passenger car body-in-white, dry and wet divisions of each grading surface, and corrosive environment grades, and establish the selection principles of anti-corrosion drainage and sealing design and anti-corrosion process plan of the white body are discussed.

This standard applies to the design of anti-corrosion drainage and sealing of the body-in-white of passenger cars, and the guidelines for the design of anti-corrosion drainage and sealing of the body-in-white of other models refer to this standard.

Found what you need?

Document preview — T/CSAE 131-2020

National Standard of the People's Republic of China

ICS
43.040.60
Classification
T 40

Issued by: China Society of Automotive Engineers

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General
  • 4.2 Materials
  • 4.3 Performance requirements
  • 4.4 Product reliability
  • 4.5 Product cleanliness
  • 5 Test method
  • 5.1 Equipment materials
  • 5.2 Test chamber
  • 5.3 Scratch Knife
  • 5.4 Performance test
  • 5.5 Test method for water jet nozzle and water gun
  • 5.6 Immersion test method
  • 5.8 Other
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type test
  • 6.3 Reference sample storage
  • 6.4 Sample cleaning
  • 6.5 Status adjustment
  • 6.6 Edge banding
  • 6.7 Aging rating of uncoated metal parts
  • 7 Identification, packaging, transportation, storage
  • 7.1 Identification
  • 7.2 Packaging
  • 7.3 Transport
  • 7.4 Storage
  • 8 Test procedure
  • 8.1 Handling of the sample after the test
  • 8.2 Evaluation of test results
  • 8.3 Detection method
  • 9 Test report
  • 9.1 Description of test report
  • 9.2 Test report content requirements
  • 9.3 Requirements for standard samples

1 Foreword

T/CSAE 131-2020 was issued by China Society of Automotive Engineers on 29 May 2020 and took effect the same day.

The T/CSAE prefix marks a association standard, adopted voluntarily.

The document runs to 14 pages in English translation.

2 Scope Preview

This standard specifies the design steps for anti-corrosion, drainage and sealing of passenger car body-in-white, dry and wet divisions of each grading surface, and corrosive environment grades, and establish the selection principles of anti-corrosion drainage and sealing design and anti-corrosion process plan of the white body are discussed. This standard applies to the design of anti-corrosion drainage and sealing of the body-in-white of passenger cars, and the guidelines for the design of anti-corrosion drainage and sealing of the body-in-white of other models refer to this standard.

T/CSAE 131-2020 falls under ICS 43.040.60, in the field of road vehicle engineering.

This catalogue holds 51 other T/CSAE standards in that field.

In this catalogue, T/CSAE standards carry edition years from 2015 to 2020.

3 About this standard

Issued by: China Society of Automotive Engineers

English translation: about 14 pages

Chinese original: about 20,259 characters

4 Related standards

Standards on related subjects:

QC/T 1029-2016 — Polypropylene (PP) honeycomb board products for automobiles

QC/T 797-2008 — Material identification and marking of automotive plastic, rubber and thermoplastic elastomer parts

5 Classification and status

International classification (ICS): 43.040.60

Chinese Standard Classification (CCS): T 40

Prefix T/CSAE: association standard, adopted voluntarily.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.

How to Download T/CSAE 131-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
14 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

T/CSAE 131-2020

$494.00