SY/T 6896.2-2013Technical specification for special tubular goods in petroleum and natural gas industries. Part 2: Drill pipe used in horizontal directional drilling (English PDF)
石油天然气工业特种管材技术规范 第2部分:定向穿越用钻杆
This is a limited preview
Buy now to download the full PDF (31 pages)
Need quotation for your management?
Get a formal quotation for SY/T 6896.2-2013 in 30 minutes.
Issued by
National Development and Reform Commission
Level / Type
National · Recommended
Issue date
January 1, 2013
Implementation date
January 1, 2013
Scope
SY/T 6896.2-2013 is the English-translated version of 石油天然气工业特种管材技术规范 第2部分:定向穿越用钻杆.
SY/T 6896.2-2013 is the Chinese standard "Technical specification for special tubular goods in petroleum and natural gas industries. Part 2: Drill pipe used in horizontal directional drilling".
It was issued by National Development and Reform Commission. It cites 22 other standards.
Found what you need?
Document preview — SY/T 6896.2-2013
National Standard of the People's Republic of China
- ICS
- 75.180.10
- Classification
- E92
Issued by: National Development and Reform Commission
Contents
- [Preview only]
- 1 Scope
- 1.2 Definition of terms
- 2 Normative references
- 2.1 General requirements
- 2.2 Pressure-drop limitations and piping configurations
- 2.3 Inlet stresses that originate from static loads in the discharge piping
- 2.4 Inlet stresses that originate from discharge reaction forces
- 2.5 Isolation valves in inlet piping
- 2.6 Rupture disk devices in combination with pressure relief valves
- 2.7 Process laterals connected to inlet piping of pressure relief valves
- 2.8 Turbulence in pressure relief device inlets
- 3 Terms and definitions
- 3.2 Safe disposal of relieving fluids
- 3.3 Back pressure limitations and sizing of pipe
- 3.4 Considerations for pilot-operated pressure relief valves
- 3.5 Stresses that originate from discharge piping
- 3.6 Isolation valves in the discharge piping
- 4 Isolation valves in pressure relief piping
- 4.1 Determination of relief requirements
- 4.2 Relieving pressure
- 4.3 Sizing for gas or vapor relief
- 4.4 Examples of isolation valve installations
- 4.5 Sizing for liquid relief: relief valves requiring liquid capacity certification
- 4.6 Sizing for liquid relief: relief valves not requiring liquid capacity certification
- 4.7 Sizing for two-phase liquid/vapor relief
- 4.8 Sizing for rupture disk devices
- 5 Bonnet or pilot vent piping
- 5.1 Conventional pressure relief valves
- 5.2 Balanced bellows pressure relief valves
- 5.3 Balanced piston pressure relief valve
- 5.4 Pilot-operated pressure relief valves
- 5.5 Thickness calculation of planar insulation layer
- 6 Drain piping
- 6.1 Installation conditions that require drain piping
- 6.2 Safe practice for installation of drain piping
- 6.3 SPM Location and Spatial Requirements
- 6.4 Other materials
- 6.5 Transportation, storage and custody of materials
- 7 Pressure relief device location and position
- 7.1 Inspection and maintenance
- 7.2 Proximity to pressure source
- 7.3 Proximity to other equipment
- 7.4 Mounting position
- 7.5 Test or lifting levers
- 7.6 Heat tracing and insulation
- 8 Bolting and gasketing
- 8.1 Care in installation
- 8.2 Proper gasketing and bolting for service requirements
- 8.3 Welding
- 8.4 Quality Control and Inspection
- 9 Multiple pressure relief valves with staggered settings
- 9.2 Installation of Mooring Foundation
- 9.3 Laying of Mooring Lines
- 9.4 Hook-up of Mooring Lines
1 Foreword
SY/T 6896.2-2013 was issued by National Development and Reform Commission on 28 November 2013.
It is one of 4 parts of the SY/T 6896 series.
The SY/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
SY/T 6896.2-2013 falls under ICS 75.180.10, in the field of petroleum and related technologies.
This catalogue holds 482 other SY/T standards in that field.
In this catalogue, SY/T standards carry edition years from 1973 to 2025.
3 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.
GB/T 22512.2
ISO 6506-1
ISO 7500-1
ISO 9303
ISO 9304
ISO 9305
ISO 9402
ISO 9513
ISO 9598
ISO/TR 9769
ISO 11484
ISO 13665
API SPEC 7-2
API SPEC 5DP-2009
ASNT SNT-TC-1A
ASTM A370
ASTM A751
ASTM E4
ASTM E10
ASTM E23
ASTM E45
ASTM E83
4 Where this standard sits
It cites 22 standards, listed in full above.
It is one part of the SY/T 6896 series, of which this catalogue holds 4 parts.
5 About this standard
Issued by: National Development and Reform Commission
English translation: about 31 pages (approximate)
6 Related standards
Other parts of this standard:
SY/T 6896.1-2012 — Technical specification for special tubular goods for petroleum and natural gas industries. Part 1: Casing string used in casing drilling
SY/T 6896.3-2016 — Technical specification for special tubular goods for petroleum and natural gas industries. Part3-Titanium alloy tubing
SY/T 6896.4-2018 — Technical specification for special tubular goods for petroleum and natural gas industries. Part 4: Titanium alloy casing
Standards on related subjects:
SY/T 5164-2016 — Roller cone drill bits
SY/T 5324-2013 — Pre-Stress Insulated Tubing
SY 0007-1999 — Design standard of corrosion control for steel pipeline and storage tank
7 Classification and status
International classification (ICS): 75.180.10
Chinese Standard Classification (CCS): E 92
Prefix SY/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 31 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 6506-1 · ISO 7500-1 · ISO 9303 · ISO 9304 · ISO 9305 · ISO 9402 · ISO 9513 · ISO 9598 · ISO/TR 9769 · ISO 11484 · ISO 13665 · API SPEC 7-2 · API SPEC 5DP-2009 · ASNT SNT-TC-1A · ASTM A370 · ASTM A751 · ASTM E4 · ASTM E10 · ASTM E23 · ASTM E45 · ASTM E83
How to Download SY/T 6896.2-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 22512.2-2008 — Petroleum and natural gas industries -- Rotary drilling equipment -- Part 2: Threading and gauging of rotary shouldered thread connections
SY/T 6896.3-2016 — Technical specification for special tubular goods for petroleum and natural gas industries. Part3-Titanium alloy tubing
SY/T 6896.1-2012 — Technical specification for special tubular goods for petroleum and natural gas industries. Part 1: Casing string used in casing drilling
SY/T 6896.2-2013
$530.00