SN/T 4367.2-2016Rules for the inspection of steel pipe for import and export--Part 2: Seamless boiler tubes (English PDF)

Foreword

The serial standards of SN/T 4367 "Inspection Rules for Import and Export Steel Pipes" are divided into 8 parts.

--- Part 1. Welded boiler tubes;

--- Part 2. Seamless boiler tubes;

--- Part 3. Oil and gas pipeline seamless pipe;

--- Part 4. Oil and gas pipelines;

--- Part 5. Geological oil drilling seamless pipe;

--- Part 6. Welded steel pipe for low pressure fluid delivery and galvanized welded steel pipe;

--- Part 7. Wire bushings;

--- Part 8. Anisotropic steel pipe.

This section is Part 2 of SN/T 4367.

This section is written in accordance with the requirements of GB/T 1.1-2009.

This part is proposed and managed by the National Certification and Accreditation Regulatory Commission.

1 Scope

This part of SN/T 4367 specifies the inspection requirements and implementation procedures for inspection and supervision of seamless boilers for import and export.

This section applies to all kinds of boilers, superheaters, exchangers, heat exchangers and pressure piping and other uses of seamless steel tubes.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document.

SN/T 0188.2 Procedures for the weighing of import and export commodities weighing instruments Part 2. General rules for weighing instruments SN/T 1323 Sampling procedures for metal materials for import and export SN/T 2412.3 General Inspection Regulations for Imports and Exports of Steels Part 3. Sampling Locations and Dimensions SN/T 2412.4 General Inspection Regulations for Imports and Exports of Steel - Part 4. Preparation Requirements

3 Terms and Definitions

The terms and definitions defined in SN/T 1323, SN/T 2412.3 and SN/T 2412.4 apply to this document.

4 Inspection