SN/T 4021-2014Determination of residues of toxaphene in fish oil and feedingstuffs for export (English PDF)
出口鱼油和鱼饲料中毒杀芬残留量的检测方法
This is a limited preview
Buy now to download the full PDF (12 pages)
Need quotation for your management?
Get a formal quotation for SN/T 4021-2014 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
January 13, 2014
Implementation date
August 1, 2014
Scope
SN/T 4021-2014 is the English-translated version of 出口鱼油和鱼饲料中毒杀芬残留量的检测方法.
SN/T 4021-2014 - This standard specifies the fish oil and fish feed toxaphene flag residues by gas chromatography - mass spectrometry/mass spectrometry. This standard applies to fish oil and fish feed flag toxaphene residues detected.
Found what you need?
Document preview — SN/T 4021-2014
National Standard of the People's Republic of China
- ICS
- 67.120.30
- Classification
- X20
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Preparation and Storage of samples
- 4 Determination
- 4.1 Method summary
- 4.2 Reagents and materials
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Shanghai Entry-Exit Inspection and Quarantine Bureau.
1 Scope
This standard specifies the fish oil and fish feed toxaphene flag residues by gas chromatography - mass spectrometry/mass spectrometry.
This standard applies to fish oil and fish feed flag toxaphene residues detected.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the edition for text Member. For undated references, the latest edition (including any amendments) applies to this document.
Laboratory use specifications and test methods GB/T 6682 Analysis
3 Preparation and Storage of samples
3.1 In the sample preparation procedure, it should prevent sample contamination or the occurrence of the change of residue content. Samples should be stored at room temperature.
3.2 fish oil capsules (pills) Samples. All samples taken from, and take about 50 capsules (pills), after breaking the cut, extruded fish oil.
3.3 fish feed. Remove all the samples taken from a representative sample of about 100g, with pulverizer, through a pore size of 0.85mm sieve (20 mesh), are divided into two, into the clean container, as a sample. Sealed and marked with tags.
4 Determination
4.1 Method summary
The sample was extracted toxaphene flag residue with anhydrous ether extract was concentrated sulfuric acid sulfonation purification, washed with 2% sodium sulfate solution After dehydration over anhydrous sodium sulfate cartridge. With negative chemical ionization gas chromatography - mass spectrometer, external standard.
4.2 Reagents and materials
Unless otherwise specified, all reagents were of analytical grade water as a water GB/T 6682 regulations.
4.2.1 Concentrated sulfuric acid. (rho about 1.84g/mL).
4.2.2 n-hexane. chromatographically pure.
4.2.3 anhydrous ether. chromatography.
4.2.4 Anhydrous sodium sulfate. ignition at 650 °C for 4h, cooled storage in a closed container in the back.
4.2.5 2% sodium sulfate solution. Weigh 2.0g sodium sulfate, was added 100mL of water.
4.2.6 toxaphene standard solution. Toxaphene -ParlarNo.26 (CHB-26); toxaphene -ParlarNo.50 (CHB-50); toxaphene -ParlarNo.62 (CHB-62); are configured to concentration 1µg/mL standard stock solution in iso-octane.
4.2.7 toxaphene mixed standard working solution. if necessary, draw the appropriate amount of each standard solution toxaphene, after pre-treatment with a blank group the quality of toxaphene standard solution was diluted to the appropriate concentration of standard working solution.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 12 pages — is available in the English PDF.
Referenced standards
Normative references
How to Download SN/T 4021-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
SN/T 2378.1-2026 — Rules for the inspection of imported natural gas - Part 1: Pipeline inspection
SN/T 4021-2014
$379.00