SN/T 3875-2014Food contact materials. Polymem. Determination of azodicarbonamide content. High performance liquid chromatography (English PDF)
食品接触材料 高分子材料 偶氮二甲酰含量的测定 高效液相色谱法
This is a limited preview
Buy now to download the full PDF (5 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3875-2014 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
January 13, 2014
Implementation date
August 1, 2014
Scope
SN/T 3875-2014 is the English-translated version of 食品接触材料 高分子材料 偶氮二甲酰含量的测定 高效液相色谱法.
SN/T 3875-2014 - This standard specifies the method of high performance liquid chromatography polymer-based food contact materials azodicarbonamide content. This standard applies to the determination of polymer-based food contact materials azodicarbonamide content.
Found what you need?
Document preview — SN/T 3875-2014
National Standard of the People's Republic of China
- ICS
- 67.250
- Classification
- X08
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 Reagents and materials
- 5 Instruments and equipment
Foreword
Accordance with the standards GB/T 1.1-2009 given rules to write.
Please note that some of the content of this document may involve patents. Distribution of this document Institutions do not assume the responsibility to identify these patents.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau.
Drafters of this standard. Trade your celery, Kouhai Juan, Zhonghuai Ning, Zhang Min, Huangchen Yang, Wu Ke, Sun Wenwen.
Food contact materials - Polymer azodicarbonamide Determination by HPLC
1 Scope
This standard specifies the method of high performance liquid chromatography polymer-based food contact materials azodicarbonamide content.
This standard applies to the determination of polymer-based food contact materials azodicarbonamide content.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
Laboratory use specifications and test methods GB/T 6682 Analysis
3 Method summary
Samples were frozen ground, ultrasonic extraction twice with tetrahydrofuran at room temperature, extract nitrogen blowing at 40 °C nearly dry, with a 5% (volume fraction) II Dimethyl sulfoxide (DMSO) solution volume to 1mL, after 0.45µm membrane filtration for HPLC injection analysis, external standard method Quantified.
4 Reagents and materials
Unless otherwise indicated, the reagents used were of analytical grade water as a water GB/T 6682 stipulated.
4.1 azodicarbonamide (C2H4N4O2, CAS number. 123-77-3). purity of greater than 99.0% (mass fraction).
4.2 tetrahydrofuran.
4.3 dimethyl sulfoxide.
4.4 Methanol. chromatographically pure.
4.5 5% (volume fraction) aqueous solution of dimethyl sulfoxide. accurate Pipette 5mL dimethyl sulfoxide (4.3) in 100mL flask, add water to volume.
4.6 azodicarbonamide stock standard solution (1.0mg/mL). Weigh accurately azodicarbonamide standard (4.1) 0.1g in 100mL capacity Flask, accurate to 0.0001g, dimethyl sulfoxide (4.3) to the mark.
4.7 Azodicarbonamide standard solution. Pipette an appropriate volume of azodicarbonamide standard stock solution (4.6), with 5% DMSO Aqueous solution (4.5) and diluting the series of standard working solution of the desired concentration.
4.8 aqueous membrane, 0.45µm.
5 Instruments and equipment
5.1 High performance liquid chromatograph. equipped with a UV detector.
5.2 ultrasonic generator. 180W.
5.3 liquid nitrogen tank.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.
Referenced standards
Normative references
How to Download SN/T 3875-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
SN/T 2378.1-2026 — Rules for the inspection of imported natural gas - Part 1: Pipeline inspection
SN/T 3875-2014
$149.00