SN/T 3836-2014Risk assessment guideline for the inspection of import used electrical and mechanical products (English PDF)

Foreword

"The import of used mechanical and electrical products test risk assessment methodology guide" is a standard system of inspection and quarantine of the third layer (mechanical and electrical test Standard System the second layer) -- General category.

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau, Shenzhen People's Republic of China Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Hebei Exit Inspection and Quarantine.

1 Scope

This standard specifies the principles and procedures to test the risk of various types of imported old mechanical and electrical products for analysis and assessment.

This standard applies to the import of used mechanical and electrical products inspection risk assessment, provide the basis for information and related risk management activities.

NOTE. In drafting this standard is assumed by a person suitably qualified and experienced use this guide.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 23694 risk management terminology SN/T 2447.2 General requirements for the import and export of electromechanical products testing - Part 2. Risk Assessment

3 Terms and Definitions

GB/T 23694 and SN/T 2447.2 and established the following terms and definitions apply to this document.

Old electromechanical products usedelectricalandmechanicalproducts Old electromechanical products which are consistent with one of the following conditions.

--- Have been used (without the use of pre-testing, debugging equipment), still have the basic functions and certain use value;

--- Unused, but exceed the quality guarantee period (non-warranty period);

--- Unused, but long time storage, components produce significant tangible loss;

--- Mix of old and new member;

--- Refurbished.

Risk risk

The possibility of import of used machinery and electronic products inspection and supervision activities affect product safety, health, environmental protection, anti-fraud and other events and Combination consequences. It should be considered relevant laws and regulations, social, economic and environmental factors.

Note. Adapted from GB/T 23694-2009, the definition of 3.1.1.

Risk management Risk identification, analysis, evaluation, exchange, processing, monitoring and assessment, in order to adjust the system process risk, usually by the decision-making bodies get on.

Risk analysis on the import of used machinery and electronic products during the inspection of risk identification, description and estimation process.

Risk identification Discovery, enumeration and description of the process of risk. In most cases, risk identification is based on historical experience and activities at the same time depends on