SN/T 3802-2014Determination of free diisocyanate esters in polyurethane adhesives used in building for import and export (English PDF)
进出口建筑用聚氨酯粘接剂中游离二异氰酸酯类化合物的测定
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3802-2014 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
January 13, 2014
Implementation date
August 1, 2014
Scope
SN/T 3802-2014 is the English-translated version of 进出口建筑用聚氨酯粘接剂中游离二异氰酸酯类化合物的测定.
SN/T 3802-2014 - This standard specifies the construction and export polyurethane adhesive free diisocyanate compound (1,4-phenylene diisocyanate, toluene Diisocyanate, hexamethylene diisocyanate, trimethyl hexamethylene diisocyanate, isophorone diisocyanate, diphenyl methane diisocyanate Ester) content by gas chromatography - mass spectrometry (GC-MS) and gas chromatography (GC).
Wherein the gas chromatography - mass spectrometry for the arbitration law.
This standard applies to import and export building free polyurethane adhesive 1,4-phenylene diisocyanate, toluene diisocyanate, hexamethylene Methyl diisocyanate, trimethyl hexamethylene diisocyanate, isophorone diisocyanate and diphenyl methane diisocyanate content Determination.
Principle 2 The sample was dried by molecular sieves ultrasonic extraction with ethyl acetate. After the extract was filtered by gas chromatography - mass spectrometry and gas chromatography, Internal standard.
Found what you need?
Document preview — SN/T 3802-2014
National Standard of the People's Republic of China
- ICS
- 91.100.50
- Classification
- Q27
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 3 Reagents and materials
- 4 Instruments and equipment
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China, Xiamen Entry-Exit Inspection and Quarantine Bureau Technology Center, Wenzhou People's Republic of China Exit Inspection and Quarantine.
1 Scope
This standard specifies the construction and export polyurethane adhesive free diisocyanate compound (1,4-phenylene diisocyanate, toluene Diisocyanate, hexamethylene diisocyanate, trimethyl hexamethylene diisocyanate, isophorone diisocyanate, diphenyl methane diisocyanate Ester) content by gas chromatography - mass spectrometry (GC-MS) and gas chromatography (GC). Wherein the gas chromatography - mass spectrometry for the arbitration law.
This standard applies to import and export building free polyurethane adhesive 1,4-phenylene diisocyanate, toluene diisocyanate, hexamethylene Methyl diisocyanate, trimethyl hexamethylene diisocyanate, isophorone diisocyanate and diphenyl methane diisocyanate content Determination.
Principle 2
The sample was dried by molecular sieves ultrasonic extraction with ethyl acetate. After the extract was filtered by gas chromatography - mass spectrometry and gas chromatography, Internal standard.
3 Reagents and materials
Unless otherwise indicated, the reagents used were of analytical grade.
3.1 molecular sieves (0.5nm). 4h before firing at 500 °C using a muffle furnace, placed in a desiccator to cool for use.
3.2 ethyl acetate. 250g per 500mL added molecular sieve (3.1), place the filter after 24h.
3.3 diisocyanate compound Standard. See Appendix A in Table A.1.
3.4 tetradecane (n-Tetradecane, CAS No. 629-59-4). purity >=98%.
3.5 internal standard stock solution. Weigh accurately 1.0g n-tetradecane (3.4) standard (accurate to 0.0001g) in 100mL flask with acetic acid Ethyl ester (3.2) diluted to the mark, formulated at a concentration of 10mg/mL stock solution of the internal standard.
3.6 standard stock solution. Accurately weigh an adequate amount of diisocyanate compound standards, preparation of standard stock solution with ethyl acetate (3.2).
Standard stock solution should be stored away from light, and avoid contact with moisture in the air.
3.7 standard solution. Pipette appropriate amount of standard stock solution (3.6), adding an appropriate amount of internal standard stock solution (3.5), diluted with ethyl acetate (3.2) into Applicable standard working solution concentration. Standard working solution should be stored away from light, and avoid contact with moisture in the air.
3.8 The organic phase filter. 0.22µm.
4 Instruments and equipment
4.1 Gas chromatograph with mass detector.
4.2 Gas chromatograph equipped with a flame ionization detector.
4.3 vortex mixer.
4.4 ultrasonic cleaner (power >=220W).
4.5 centrifuge. speed of not less than 4000r/min.
4.6 plug cuvette. 10mL.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download SN/T 3802-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SN/T 2378.1-2026 — Rules for the inspection of imported natural gas - Part 1: Pipeline inspection
SN/T 5778-2026 — Rules for the inspection of common imported and exported rare earth products
SN/T 5784-2026 — Inspection of casting and forging production processes of steel - Hot acid etching method
SN/T 3802-2014
$249.00