SN/T 3775.1-2015Specification for verification of quality conformity for import and export textiles. Part 1: Textile raw materials (English PDF)

Foreword

SN/T 3775 "quality textile export compliance verification standard" is divided into six sections.

--- Part 1. textile raw materials;

--- Part 2. Yarn;

--- Part 3. woven fabric;

--- Part 4. textiles;

--- Part 5. Textile and Garment;

--- Part 6. Special textiles.

This section first SN/T 3775 Part 1.

This section drafted in accordance with GB/T 1.1-2009 given rules.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

Introduction

Compliance Verification conformity assessment activities is an important program, and provisions by definition, its meaning is through direct and indirect ways Require proof of the product's specified have been met, therefore, the product compliance verification, not only includes the verification of procedural requirements, further comprising test Certified technical requirements.

When the inspection and quarantine agencies to import and export products conformity assessment activities, compliance verification inspection and quarantine institutions it is important work.

Textile raw materials in the field of immigration, inspection and quarantine agencies adopt compliance verification of this work is an important means of inspection and supervision.

Textile raw materials is a relative concept. For the mill, the textile raw materials refers to all natural or chemical fibers for spinning. natural Fiber. cotton (white cotton, colored cotton, organic cotton), linen (flax, ramie, sisal, etc.), silk (mulberry silk, tussah silk, etc.), wool (wool, rabbit fur, Australian wool Etc.), chemical fiber polyester staple fiber means, nylon staple fiber, polypropylene staple fiber, acrylic staple fiber, viscose staple fiber spinning fibers.

In accordance with the requirements of the inspection and quarantine standardization system, import and export of textile raw material quality inspection and quarantine compliance verification belonging to the textile standard system A part of the quality compliance verification series of standards. Inspection and quarantine inspection agency legal representative commodities are imported textile raw materials sheep Wool, cotton imports, of synthetic filament, exporting raw silk (silk, earth wire, double Palace silk), export hemp; inspection and quarantine agencies in the work needed to make to carry out verification of compliance with quality specifications validation activities representative synthetic staple commodities import and export, import and export of linen two rough, raw silk imports and other materials, it becomes textile raw materials described in this section.

This section for the import and export of textile raw materials quality compliance verification requirements of the applicable provisions of the quality of compliance verification procedures and content.

Import and export of textile raw materials in the field of some commodities, such as imported wool and cotton imports, in terms of trade policy or method of inspection and supervision, inspection Inspection and quarantine agencies need to combine the requirements of the terms of trade and trade practices, references and information on the formation of the appendix to this section.

Import and export of textiles quality compliance verification specification Part 1. Textile Raw Materials

1 Scope

SN/T 3775 provisions of this part of the import and export of textile raw material quality compliance verification requirements, procedures and content.

This section applies to the inspection and quarantine agencies (hereinafter referred to as inspection and quarantine institutions) on the import and export of textile raw materials product quality operators Co-verification, and as import and export trade inspection and quarantine agencies for overseas suppliers informational literature to assess the credit quality of management, but also as for domestic production and processing enterprises of the reference document classification management.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 1103 Upland Cotton GB 1797 silk GB T 22282 textile fibers toxic and hazardous substances in /SN/T 1649 Textiles Import and Export Inspection Safety Project Specification Basic requirements SN/T 2755.4 exports of industrial products category management approach to inspection and supervision methods SN/T 2872 Textiles import and export inspection code identification

3 Terms and Definitions

The following terms and definitions apply to this document.

Regulatory requirements MandatoryRequirements Relevant laws, regulations, decrees, regulations, mandatory standards express requirements.

Note. such as laws, regulations, decrees, ordinances such normative documents specified requirements shall be expressly stated. This section refers specifically to the importing country (region) Our textiles and related safety prescribe mandatory requirements. Including importing countries (regions) with the Chinese government has signed bilateral agreements inspection, all technology projects under the agreements are considered mandatory. Such as China GB 18401, the EU 2009/48/EC Directive and other requirements.

Non-statutory requirements Non-MandatoryRequirements it does not have a property law generally refers to relevant organizations, business, trade relations person mutually agreed upon technical requirements.

Note 1. This section is specific to certain countries or regions (organization) to the recommended standards, bulletins, statements and other product safety related technology in textiles to prescribe begging. And other provisions such as Oeko-TexStandard100 voluntary requirements.

Note 2. The quality of import and export of textile raw materials are judged on various non-compliance with regulatory requirements of the degree, the general part of the trade settlement, not mandatory the nature of technical regulations.

Conformity Assessment evaluationofconformity Systematic examination of a product, process or service to meet the requirements of the degree.