SN/T 3733-2013Flexible intermediate bulk containers(FIBCs). Test method for cyclic top lift (English PDF)
集装袋 循环顶吊试验方法
This is a limited preview
Buy now to download the full PDF (6 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3733-2013 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
November 6, 2013
Implementation date
June 1, 2014
Scope
SN/T 3733-2013 is the English-translated version of 集装袋 循环顶吊试验方法.
SN/T 3733-2013 - This standard specifies the Container export commodities transport packaging methods and procedures for circulation of the top hang test. Top hanging loop test is applicable to the export of non containing dangerous goods transport packaging FIBC.
Found what you need?
Document preview — SN/T 3733-2013
National Standard of the People's Republic of China
- ICS
- 55.080
- Classification
- A80
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The reference to the standard ISO 21898:2004 "Packaging container bags containing non-dangerous goods", the relevant test of the top hang loop FIBC Technical content is consistent with the above criteria.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau.
1 Scope
This standard specifies the Container export commodities transport packaging methods and procedures for circulation of the top hang test.
Top hanging loop test is applicable to the export of non containing dangerous goods transport packaging FIBC.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 21898 packaging containing non-hazardous goods container bags
3 Terms and Definitions
As defined in ISO 21898 and the following terms and definitions apply to this document.
Container flexibleintermediatebulkcontainers; FIBCs Capacity of not more than 3.0m3, loading NW flexible intermediate bulk containers of 400kg ~ 3000kg. Mainly composed of woven plastic or with Body other flexible material combinations and, if necessary, appropriate lining and lifting the top member.
Heavy-duty reusable FIBC heavy-dutyreusableflexibleintermediatebulkcontainer can be repaired, multiple loading, unloading of bulk bags, but the mechanical strength after repair must meet the mechanical strength of the repair before.
Standard FIBC standard-dutyreusableflexibleintermediatebulkcontainer reusable it may be a limited number of loading, unloading of bulk bags, not repair, but you can replace the inner bag.
Disposable Container single-tripflexibleintermediatebulkcontainer Container can only be filled once used, can not be repaired or replaced within the bag re-use.
Safety load safeworkingload; SWL the maximum allowable load Container load use.
Test Method 4
4.1 by the filled FIBC lifting member hanging up, a pressure plate disposed above the filler, pressurized to a certain rate, the pressure side Optionally type in one of two ways.
a) hanging from the FIBC lifting upward pressure plate produce a downward resistance;
b) Container suspended in a fixed frame, a pressure plate produce a downward force.
4.2 The filled FIBC subject to repeated pressure relief, pressure cycles. Record of these forces, and see if there is any impact Container
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 21898
How to Download SN/T 3733-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SN/T 2378.1-2026 — Rules for the inspection of imported natural gas - Part 1: Pipeline inspection
SN/T 5778-2026 — Rules for the inspection of common imported and exported rare earth products
SN/T 5784-2026 — Inspection of casting and forging production processes of steel - Hot acid etching method
SN/T 3733-2013
$105.00