SN/T 3714-2013Quantitative screening of cobalt, arsenic, chromium, tin and lead in rubber and plastic products. Inductively coupled plasma atomic emission spectrometry (English PDF)
橡胶和塑料制品中钴、砷、铬、锡和铅的定量筛选方法 电感耦合等离子体原子发射光谱法
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3714-2013 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
November 6, 2013
Implementation date
June 1, 2014
Scope
SN/T 3714-2013 is the English-translated version of 橡胶和塑料制品中钴、砷、铬、锡和铅的定量筛选方法 电感耦合等离子体原子发射光谱法.
SN/T 3714-2013 - This standard specifies the inductively coupled plasma atomic emission spectrometry for quantitative screening of rubber and plastic products, cobalt, arsenic, chromium, tin and lead Measurement method.
This standard applies to tire rubber, silicone rubber, polyethylene (PE), polycarbonate (PC), polypropylene (PP), polystyrene (PS), polyvinyl chloride Ene (PVC), acrylonitrile - butadiene - styrene (ABS) cobalt, arsenic, chromium, tin and lead determination.
Determination of the standard cobalt, arsenic, chromium, tin and lead Lower limit (the LOQ) were 5mg/kg, 10mg/kg, 5mg/kg, 10mg/kg, 10mg/kg.
Found what you need?
Document preview — SN/T 3714-2013
National Standard of the People's Republic of China
- ICS
- 83.140
- Classification
- G40
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 Reagents and materials
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Zhejiang Exit Inspection and Quarantine, Shenzhen People's Republic of China Entry-Exit Inspection and Quarantine Bureau.
1 Scope
This standard specifies the inductively coupled plasma atomic emission spectrometry for quantitative screening of rubber and plastic products, cobalt, arsenic, chromium, tin and lead Measurement method.
This standard applies to tire rubber, silicone rubber, polyethylene (PE), polycarbonate (PC), polypropylene (PP), polystyrene (PS), polyvinyl chloride Ene (PVC), acrylonitrile - butadiene - styrene (ABS) cobalt, arsenic, chromium, tin and lead determination. Determination of the standard cobalt, arsenic, chromium, tin and lead Lower limit (the LOQ) were 5mg/kg, 10mg/kg, 5mg/kg, 10mg/kg, 10mg/kg.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including all amendments) used in the present document.
Preparation of standard solution of GB/T 602 Determination of impurities in chemical reagents Laboratory use specifications and test methods GB/T 6682 Analysis GB/T 8170 repair value expressed about the rules and limit values and judgment
3 Method summary
By microwave digestion sample, test solution by inductively coupled plasma atomic emission spectroscopy after digestion Determination, external standard.
4 Reagents and materials
Unless otherwise specified, all reagents superior grade pure water test water should meet the two requirements of GB/T 6682 stipulated.
4.1 nitric acid (rho = 1.42g/mL, 65%).
4.2 Hydrogen peroxide (rho = 1.10g/mL, 30%).
4.3 fluoroborate (rho = 1.84g/mL, 48%).
4.4 nitric acid (595). Take nitric acid (4.1) 5mL was added to 95mL of distilled water and mix.
4.5 Nitrate (595) - fluoroborate (298). nitric acid were taken (4.1) 5mL, fluoroboric acid (4.3) 2mL of distilled water was added to 93mL and mix well.
4.6 single element stock standard solution. Standard solution of cobalt, arsenic, chromium, tin, and lead elements prepared according to GB/T 602 methods, or directly Element standard solution standard substance certificate within the validity period. Cobalt, arsenic, chromium, lead and tin concentration standard solution were 1000µg/mL.
4.7 mixed standard solution. Pipette respectively cobalt, arsenic, chromium, tin and lead single element standard stock solution (4.6) 10.00mL placed in 100mL capacity
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
How to Download SN/T 3714-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 602-1988 — Chemical reagent--Preparations of stock standard solutions
GB/T 602-2002 — Chemical reagent - Preparations of standard solutions for impurity
GB/T 602-2026 — Chemical reagent - Preparation of standard solutions for impurity determination
SN/T 3714-2013
$105.00