SN/T 3642-2013Determination of metalaxyl residues in fruits for export. GC/MS method (English PDF)
出口水果中甲霜灵残留量检测方法 气相色谱-质谱法
This is a limited preview
Buy now to download the full PDF (10 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3642-2013 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
August 30, 2013
Implementation date
March 1, 2014
Scope
SN/T 3642-2013 is the English-translated version of 出口水果中甲霜灵残留量检测方法 气相色谱-质谱法.
SN/T 3642-2013 - This standard specifies the residues in fruits for export metalaxyl gas chromatography - mass spectrometry method. This standard applies to the determination of export apples, oranges, pears, peaches, grapes, persimmons and other fruits metalaxyl residues and confirmation.
Found what you need?
Document preview — SN/T 3642-2013
National Standard of the People's Republic of China
- ICS
- 67.080
- Classification
- X24
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Method summary
- 3 Reagents and materials
- 4 Instruments and equipment
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces SN 0281-1993 "Metalaxyl residues in fruits for export." this standard compared with SN 0281-1993, the main technical changes are as follows.
--- Adjustment clause choreography;
--- Change the pre-treatment methods;
--- Use GC-MS determination.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Zhejiang Exit Inspection and Quarantine.
1 Scope
This standard specifies the residues in fruits for export metalaxyl gas chromatography - mass spectrometry method.
This standard applies to the determination of export apples, oranges, pears, peaches, grapes, persimmons and other fruits metalaxyl residues and confirmation.
2 Method summary
The samples were extracted with acetonitrile, the solid-phase extraction (SPE), using gas chromatography - mass spectrometry in selected ion monitoring mode was measured, external standard method Quantified.
3 Reagents and materials
Unless otherwise specified, all reagents were of analytical grade, water is deionized water.
3.1 acetonitrile. liquid chromatography.
3.2 Toluene. liquid chromatography.
3.3 hexane. liquid chromatography.
3.4 sodium chloride.
3.5 anhydrous sodium. 650 °C burning 4h, stored in a sealed container in the back.
3.6 acetonitrile - toluene (73 volume). Take 30mL of toluene and 70mL of acetonitrile mixed.
3.7 metalaxyl standards. purity of greater than 99%.
3.8 standard solution. Accurately weigh an adequate amount of metalaxyl standard (3.7), with n-hexane was dissolved and set the volume to 100mL brown bottle flask, A concentration of 200µg/mL standard stock solution. Hexane stock solution and then diluted as needed to prepare a suitable standard working concentration Solution, this solution was stored at (0 ~ 4) °C conditions.
3.9 Amino-SPE. 3mL, 0.5g or equivalent person.
3.10 Activated carbon SPE. 3mL, 0.5g or equivalent person.
4 Instruments and equipment
4.1 Gas chromatography - mass spectrometer, equipped with an electronic bombardment source (EI).
4.2 rotary evaporator.
4.3 Solid phase extraction device.
4.4 nitrogen blowing concentrators.
4.5 muffle furnace.
4.6 vortex mixer.
4.7 Centrifuge. >=4000r/min.
4.8 Balance. a sense of volume, respectively 0.01g and 0.1mg.
4.9 concentrated bottle. 100mL.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 10 pages — is available in the English PDF.
How to Download SN/T 3642-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SN/T 2378.1-2026 — Rules for the inspection of imported natural gas - Part 1: Pipeline inspection
SN/T 5778-2026 — Rules for the inspection of common imported and exported rare earth products
SN/T 5784-2026 — Inspection of casting and forging production processes of steel - Hot acid etching method
SN/T 3642-2013
$305.00