SN/T 3603-2013Quantitative screening of anthracene oil in rubber products. Gas chromatography-mass spectrometry method (English PDF)
橡胶制品中蒽油的快速筛选测定 气相色谱-质谱联用法
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3603-2013 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
August 30, 2013
Implementation date
March 1, 2014
Scope
SN/T 3603-2013 is the English-translated version of 橡胶制品中蒽油的快速筛选测定 气相色谱-质谱联用法.
SN/T 3603-2013 - This standard specifies by gas chromatography - mass spectrometry method of rubber products anthracene oil rapid screening measurement.
This standard applies to the determination of rubber products for rapid screening of anthracene oil, anthracene oil measurement results for acenaphthylene, fluorene, phenanthrene, anthracene, carbazole, fluoranthene and other major the sum of the characteristics of the compound divided by the maximum risk factor of 0.4, measured anthracene oil lower limit of 50mg/kg.
Found what you need?
Document preview — SN/T 3603-2013
National Standard of the People's Republic of China
- ICS
- 83.140.01
- Classification
- G40
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Terms and definitions
- 3 Method summary
- 4 Reagents and materials
- 5 Apparatus
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China, Ningbo Entry-People's Republic of China Guangdong Entry-Exit Inspection and Quarantine Bureau.
1 Scope
This standard specifies by gas chromatography - mass spectrometry method of rubber products anthracene oil rapid screening measurement.
This standard applies to the determination of rubber products for rapid screening of anthracene oil, anthracene oil measurement results for acenaphthylene, fluorene, phenanthrene, anthracene, carbazole, fluoranthene and other major the sum of the characteristics of the compound divided by the maximum risk factor of 0.4, measured anthracene oil lower limit of 50mg/kg.
2 Terms and definitions
The following terms and definitions apply to this document.
Anthracene oil Anthraceneoil A complex of hydrocarbons, coal tar by carbonization to obtain approximate distillate range between 300 °C ~ 400 °C, the main ingredient Including acenaphthylene, fluorene, phenanthrene, anthracene, carbazole, fluoranthene compound characteristics, CAS number. 90640-80-5.
3 Method summary
The samples were ultrasonic extraction, gas chromatography - mass spectrometry to detect the amount of internal standard to give the main features of anthracene oil compound Acenaphthylene, fluorene, phenanthrene, anthracene, carbazole, fluoranthene content, add and divided by the greatest risk factor 0.4, anthracene oil content meter.
4 Reagents and materials
Unless otherwise specified, use only analytical reagent.
4.1 methylene chloride, chromatography.
4.2 Nitrogen. purity >=99.99%.
4.3 Internal standard. deuterated Philippines, purity >=97%.
4.4 Standard substance. acenaphthene, fluorene, phenanthrene, anthracene, carbazole, fluoranthene standard substance, purity >=97%.
4.5 formulated internal standard stock solution (500mg/L). Weigh accurately the internal standard (4.3) 0.05g (accurate to 0.1mg) to 100mL volumetric flask the methylene chloride was added to dissolve, dilute to the mark and shake.
4.6 formulated internal standard solution (5mg/L). accurate Pipette 5mL internal standard stock solution (4.5) to a 500mL flask with dichloromethane to volume shake.
4.7 preparation of mixed standard stock solution (1000mg/L). Weigh accurately each standard substance (4.4) 0.1g (accurate to 0.1mg) to 100mL flask, add internal standard solution (4.6) to dissolve, dilute to the mark and shake.
Preparation 4.8 mixed standard working solution. accurately Pipette the appropriate amount of mixed standard stock solution (4.7), using the internal standard solution (4.6) to the desired volume concentration.
5 Apparatus
5.1 Gas chromatography - mass spectrometry. EI source and with autosampler.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
How to Download SN/T 3603-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SN/T 2378.1-2026 — Rules for the inspection of imported natural gas - Part 1: Pipeline inspection
SN/T 5778-2026 — Rules for the inspection of common imported and exported rare earth products
SN/T 5784-2026 — Inspection of casting and forging production processes of steel - Hot acid etching method
SN/T 3603-2013
$85.00