SN/T 3601-2013Determination of total sulfur in graphite. Infrared absorption spectrometry (English PDF)
石墨中全硫含量的测定 红外吸收光谱法
This is a limited preview
Buy now to download the full PDF (4 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3601-2013 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
August 1, 2013
Implementation date
March 1, 2014
Scope
SN/T 3601-2013 is the English-translated version of 石墨中全硫含量的测定 红外吸收光谱法.
SN/T 3601-2013 - This standard specifies the method of infrared absorption spectrometry determination of total sulfur content of graphite in high temperature combustion.
This standard applies to the determination of flake graphite, artificial graphite, electrode and graphite products in the total sulfur content. Measurement range (mass fraction Number). 0.0010% to 2.5%.
Found what you need?
Document preview — SN/T 3601-2013
National Standard of the People's Republic of China
- ICS
- 73.080
- Classification
- Q51
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Method summary
- 3 Reagents and materials
- 4 Instrument
- 5 Sample
- 6 Step, Analysis
- 6.1 Curve
- 6.2 Check the curve
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. Tianjin People's Republic of China Exit Inspection and Quarantine.
1 Scope
This standard specifies the method of infrared absorption spectrometry determination of total sulfur content of graphite in high temperature combustion.
This standard applies to the determination of flake graphite, artificial graphite, electrode and graphite products in the total sulfur content. Measurement range (mass fraction Number). 0.0010% to 2.5%.
2 Method summary
Analysis of samples at 1300 °C ~ 1350 °C high temperature in a stream of oxygen combustion decomposition. Gas (water vapor and particles) after burning through Negative pressure is transmitted to the infrared absorption cell, wherein the determination of sulfur dioxide by infrared detection system.
3 Reagents and materials
3.1 Standard substances. graphite certified reference materials with total sulfur content.
3.2 oxygen. not less than 99.5% purity.
3.3 Desiccant. magnesium perchlorate, AR.
4 Instrument
4.1 Infrared measuring sulfur analyzer. You can set the temperature range of 1000 °C ~ 1350 °C, accuracy ± 10 °C.
4.2 Balance. a sense of the amount of 0.1mg.
4.3 porcelain boat. temperature above 1300 °C, placed in a desiccator.
5 Sample
The sample size should be less than 100µm.
6 Step, Analysis
Warning. The specimen used porcelain boat due to high temperature, remove the tray placed in the mouth at a time, to achieve cooling, pay attention to safety, in order to avoid scald.
6.1 Curve
To establish a method working curve. Select multiple graphite standard samples with different sulfur contents, weighed similar quality was measured, these standards Sulfur content of reference material should be able to cover the range of sulfur content in the tested sample.
Read the results from the instrument.
6.2 Check the curve
Check the recommended working curve at the beginning and end of each batch of samples to be tested, the test sample is large when the middle of adding 1 or 2 times.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.
How to Download SN/T 3601-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SN/T 2378.1-2026 — Rules for the inspection of imported natural gas - Part 1: Pipeline inspection
SN/T 5778-2026 — Rules for the inspection of common imported and exported rare earth products
SN/T 5784-2026 — Inspection of casting and forging production processes of steel - Hot acid etching method
SN/T 3601-2013
$115.00