SN/T 3597-2013Method of distinguishing imported hot-rolled steel plate and cold-rolled steel plate (English PDF)
进口热轧板与冷轧板鉴别方法
This is a limited preview
Buy now to download the full PDF (5 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3597-2013 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
August 30, 2013
Implementation date
March 1, 2014
Scope
SN/T 3597-2013 is the English-translated version of 进口热轧板与冷轧板鉴别方法.
SN/T 3597-2013 - This standard specifies the method of identifying imported hot-rolled plates and cold rolled sheet. This standard applies to the identification of ordinary carbon steel hot rolled plate and cold rolled sheet.
Found what you need?
Document preview — SN/T 3597-2013
National Standard of the People's Republic of China
- ICS
- 73.060.10
- Classification
- D31
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Principle of the method
- 5.1 Ready
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau.
1 Scope
This standard specifies the method of identifying imported hot-rolled plates and cold rolled sheet.
This standard applies to the identification of ordinary carbon steel hot rolled plate and cold rolled sheet.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 230.1 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard ruler) GB/T 13298 metal microstructure inspection method
3 Terms and Definitions
The following terms and definitions apply to this document.
Hot-rolled hotroling at a temperature above the recrystallization rolling conducted.
Cold rolled coldroling at a temperature below the recrystallization rolling is performed.
Hot-rolled plate hot-roledsteelplate Hot-rolled sheet is blank (mainly billet) as raw materials, the recrystallization temperature or higher, from the rolled steel sheet.
Cold-rolled plate cold-roledsteelplate Cold-rolled plate is hot-rolled sheet for raw materials, at a temperature below the recrystallization were made of rolled steel plate.
4 Principle of the method
Hot-rolled plates and cold rolled sheet there is a certain difference in the quality of appearance, thickness, hardness and microstructure. The method by comparing hot-rolled sheet and Quality cold-rolled plate appearance, thickness, hardness and microstructure, to distinguish between hot-rolled plates and cold rolled sheet. Morphology typical appearance of hot-rolled plates and cold rolled sheet Microstructure and pictures, see Appendix A.
Identification of 5
5.1 Ready
5.1.1 Products to reflect the characteristics of the product, as much as possible to collect product information, such as the production of the country, brands, product standards, and Production Engineering
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.
Referenced standards
How to Download SN/T 3597-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13298-1991 — Metal. Inspection method of microstrcture
GB/T 13298-2015 — Inspection Methods of Microstructure for Metals
GB/T 230.1-2004 — Metallic Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
SN/T 3597-2013
$149.00