SN/T 3535-2013Test method of mechanical dishwashing resistance for domestic ceramic articles (English PDF)
日用陶瓷耐洗碗机洗涤性能测试方法
This is a limited preview
Buy now to download the full PDF (6 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3535-2013 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
March 1, 2013
Implementation date
September 16, 2013
Scope
SN/T 3535-2013 is the English-translated version of 日用陶瓷耐洗碗机洗涤性能测试方法.
SN/T 3535-2013 - This standard specifies the test method for resistance dishwasher detergent performance ceramics for daily use. This standard applies to dishwasher detergent resistant ceramic products for daily use performance tests.
Found what you need?
Document preview — SN/T 3535-2013
National Standard of the People's Republic of China
- ICS
- 81.060.20
- Classification
- Y24
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 5 Reagents and materials
- 6 Instruments and equipment
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The process of drafting the standard reference EN12875-1:2005 "anti utensils washing machine performance test methods - Part 1. Household devices Dish arbitration test methods. " Please note that some of the content of this document may involve patents. Distribution of this document Institutions do not assume responsibility to identify these authoritarian.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
1 Scope
This standard specifies the test method for resistance dishwasher detergent performance ceramics for daily use.
This standard applies to dishwasher detergent resistant ceramic products for daily use performance tests.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
Test method IEC 60436 Performance of household electric dishwashers
3 Terms and Definitions
The following terms and definitions apply to this document.
Test cycle Test samples were subjected to pre-wash the dishwasher, washing detergent, intermediate rinse, rinsing agent rinsing and drying and a series of processes.
Washing resistance dishwashingresistance Article subjected to certain test cycles without significant change in capacity.
Principle 4
The test sample is placed in the dishwasher test, a predetermined number of times after the cycle test, the differences observed are not the test sample and the sample, whereby the sentence Resistance to washing of the sample set.
5 Reagents and materials
5.1 Test recycling water. drinking water, hardness. 0.3mmol/L ~ 0.6mmol/L, temperature. 15 °C ± 5 °C.
5.2 detergent and rinse agent. cleaning agents should be used to meet and rinse agent Appendix A requirements.
5.3 Citric acid. AR.
6 Instruments and equipment
Test the dishwasher should have the following technical conditions.
a) Temperature. 0 °C ~ 70 °C control, accuracy ± 1 °C;
b) Pressure Range. 5N/cm2 ~ 100N/cm2;
c) Water Volume. the ability to control the 6.0L ± 0.5L;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.
Referenced standards
Normative references
IEC 60436
How to Download SN/T 3535-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SN/T 2378.1-2026 — Rules for the inspection of imported natural gas - Part 1: Pipeline inspection
SN/T 5778-2026 — Rules for the inspection of common imported and exported rare earth products
SN/T 5784-2026 — Inspection of casting and forging production processes of steel - Hot acid etching method
SN/T 3535-2013
$165.00