Valid

SN/T 3525-2013Determination of styrene in adhesives used in buiding for import and export. Gas chromatography-mass spectrometry (English PDF)

进出口建筑用粘接剂中苯乙烯的测定 气相色谱-质谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (6 pages)

Need quotation for your management?

Get a formal quotation for SN/T 3525-2013 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

March 1, 2013

Implementation date

September 16, 2013

Scope

SN/T 3525-2013 is the English-translated version of 进出口建筑用粘接剂中苯乙烯的测定 气相色谱-质谱法.

SN/T 3525-2013 - This standard specifies the import and export construction adhesive styrene gas chromatography - mass spectrometry method. This standard applies adhesive styrene content measurement in construction and export.

Determination of the lower limit of 25mg/kg. Principle 2 Using ethyl acetate or N, N- dimethylformamide was dissolved samples by gas chromatography - mass spectrometry performed.

According to their retention time and Spectrum qualitative and quantitative internal standard.

Found what you need?

Document preview — SN/T 3525-2013

National Standard of the People's Republic of China

ICS
91.100.50
Classification
Q27

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 3 Reagents
  • 4 Instruments and equipment

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard was drafted. People's Republic of China Guangdong CIQ.

1 Scope

This standard specifies the import and export construction adhesive styrene gas chromatography - mass spectrometry method.

This standard applies adhesive styrene content measurement in construction and export. Determination of the lower limit of 25mg/kg.

Principle 2

Using ethyl acetate or N, N- dimethylformamide was dissolved samples by gas chromatography - mass spectrometry performed. According to their retention time and Spectrum qualitative and quantitative internal standard.

3 Reagents

Unless otherwise indicated, the reagents used were of analytical grade.

3.1 ethyl acetate. purity >=99.5%.

3.2 N, N- dimethylformamide (DMF). purity >=99.5%.

3.3 Styrene (CAS Registry Number. 100-42-5). standard purity >=99.5%.

3.4 n-undecane (internal standard, CAS Registry Number. 1120-21-4). purity >=99%.

3.5 standard stock solution a. Accurately weigh styrene (3.3) 0.125g (accurate to 0.1mg), set 25mL volumetric flask, ethyl acetate (3.1) diluted to the mark, shake well. The concentration of 5g/L, may be at 0 °C ~ 4 °C sealed a month.

3.6 standard stock solution b. Accurately weigh styrene (3.3) 0.125g (accurate to 0.1mg), set 25mL volumetric flask with DMF (3.2) diluted to the mark, shake well. The concentration of 5g/L, may be at 0 °C ~ 4 °C sealed a month.

3.7 internal standard stock solution a. Weigh accurately undecane (3.4) 0.25g (precise to 0.1mg), set 50mL volumetric flask, with ethyl Ester (3.1) diluted to the mark, shake well. The concentration of 5g/L, may be at 0 °C ~ 4 °C sealed a month.

3.8 internal standard stock solution b. Weigh accurately undecane (3.4) 0.25g (precise to 0.1mg), a 50mL volumetric flask with DMF (3.2) diluted to the mark, shake well. The concentration of 5g/L, may be at 0 °C ~ 4 °C sealed a month.

3.9 standard solution a. accurate Pipette stock standard solution a (3.5) and internal standard stock solution a (3.7) each 1.00mL, placed 25mL capacity Bottle and diluted with ethyl acetate (3.1) to the mark, shake well. The solution of styrene and internal standard concentration was 200mg/L, available at at 0 °C ~ 4 °C sealed and stored for 1 week.

3.10 standard solution b. accurate Pipette stock standard solution b (3.6) and internal standard stock solution b (3.8) each 1.00mL, placed 25mL capacity Volumetric flask, and diluted with DMF (3.2) to the mark, shake well. The solution of styrene and internal standard concentration was 200mg/L, available at at 0 °C ~ 4 °C sealed and stored for 1 week.

4 Instruments and equipment

4.1 Gas chromatography - mass spectrometry (GC-MS). with electron impact ionization (EI).

4.2 Balance. a sense of the amount of 0.1mg.

4.3 ultrasonic generator. rated power not less than 200W.

4.4 flask. 25mL, 50mL.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.

How to Download SN/T 3525-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
6 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 3525-2013

$169.00