SN/T 3514-2013Identification method of texture analysis for grain oriented and non-oriented electrical steels. X-ray diffraction(XRD) (English PDF)
电工钢晶粒取向与无取向鉴定方法 X射线衍射测定织构法
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3514-2013 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
March 1, 2013
Implementation date
September 16, 2013
Scope
SN/T 3514-2013 is the English-translated version of 电工钢晶粒取向与无取向鉴定方法 X射线衍射测定织构法.
SN/T 3514-2013 - This standard specifies the X-ray diffraction texture and grain-oriented electrical steel identified non-oriented approach. This standard applies to the grain-oriented and non-oriented electrical steel Identification of.
Found what you need?
Document preview — SN/T 3514-2013
National Standard of the People's Republic of China
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Principle of the method
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Guangdong CIQ.
1 Scope
This standard specifies the X-ray diffraction texture and grain-oriented electrical steel identified non-oriented approach.
This standard applies to the grain-oriented and non-oriented electrical steel Identification of.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
JB/T 9400 X-ray diffractometer technical conditions
3 Terms and Definitions
The following terms and definitions apply to this document.
Grain-oriented grainorientation Grain to produce electrical steel by deformation and recrystallization annealing and a series of preferential orientation.
Texture
Polycrystalline grain oriented phenomenon concentrated in the vicinity of one or some of the orientation of said preferred orientation, polycrystalline said preferred orientation Texture.
GOSS texture GOSStexture Cold rolled and annealed sheet metal, sometimes such a texture that coincides with (110) crystal plane of each grain in the rolling plane, [001] crystal direction parallel to the rolling direction, usually written as (100) [001] texture, also known as the "cubic texture." 3.4 ODF orientationdistributionfunction (referred ODF) Spatial orientation g (phi1, phi, phi2) of the density distribution f (g) may be the expression of polycrystals oriented distribution of the entire space, which are called null Room orientation distribution function (ODF).
{Hkl} pole figures {hkl} polefigure Pole figure shows a selected test material in various grain {hkl} crystal face orientation distribution pattern.
4 Principle of the method
Measured by X-ray diffraction intensity of electrical steel texture, and calculated GOSS texture content, determination according to GOSS texture Given grain-oriented electrical steel.
Note. A common orientation and non-oriented silicon steel pole figure and ODF diagram in Appendix A, Appendix B, Appendix C, Appendix D.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
How to Download SN/T 3514-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 9400-1999 — X-ray diffractometers - Technical specifications
JB/T 9400-2010 — Specification of X-ray diffractometer
SN/T 2378.1-2026 — Rules for the inspection of imported natural gas - Part 1: Pipeline inspection
SN/T 3514-2013
$165.00