SN/T 3370-2012Determination of arsenic, mercury in tungsten ore. Atomic fluorescence spectrometric method (English PDF)
钨矿中砷、汞含量的测定 原子荧光光谱法
This is a limited preview
Buy now to download the full PDF (5 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3370-2012 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
December 12, 2012
Implementation date
July 1, 2013
Scope
SN/T 3370-2012 is the English-translated version of 钨矿中砷、汞含量的测定 原子荧光光谱法.
SN/T 3370-2012 - This standard specifies the method of analysis of tungsten ore of arsenic, mercury content by atomic fluorescence spectrometry. This standard applies to the determination of tungsten ore of arsenic, mercury content in the measured lower limit. arsenic and 0.20mg/kg, mercury 0.09mg/kg.
Found what you need?
Document preview — SN/T 3370-2012
National Standard of the People's Republic of China
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 Reagents
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Zhejiang Exit Inspection and Quarantine.
1 Scope
This standard specifies the method of analysis of tungsten ore of arsenic, mercury content by atomic fluorescence spectrometry.
This standard applies to the determination of tungsten ore of arsenic, mercury content in the measured lower limit. arsenic and 0.20mg/kg, mercury 0.09mg/kg.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
Preparation of standard solution of GB/T 602 Determination of impurities in chemical reagents Laboratory use specifications and test methods GB/T 6682 Analysis
3 Method summary
Samples with hydrochloric acid, nitric acid digestion, arsenic and potassium borohydride reaction of volatile hydrides, mercury and potassium borohydride reaction in a particular medium Generate atomic mercury, loaded by argon quartz atomizer, under arsenic, mercury hollow cathode lamp irradiation, emit a characteristic wavelength of fluorescence, which fluorescence Light intensity and determination of element content is proportional to the fluorescence intensity of the standard series of comparative quantitative analysis.
4 Reagents
Unless otherwise indicated in the analysis using only analytical grade reagents and in line with GB/T 6682 secondary water.
4.1 nitric acid (rho = 1.19g/mL).
4.2 hydrochloric acid (rho = 1.42g/mL).
4.3 potassium borohydride. pure class distinctions.
4.4 Potassium hydroxide. pure class distinctions.
4.5 hydrochloric acid solution (595, volume fraction). Measure 50mL of hydrochloric acid (4.2), diluted with water to 1000mL, shake.
4.6 tartaric acid solution (20%). Weigh 20.0g of tartaric acid, dissolved in water and diluted with water to 100mL.
4.7 potassium borohydride (1.0%) mixed solution. Weigh 1.25g of potassium hydroxide (4.4) into a beaker, dissolved in a small amount of water, weighed 2.5g Boron Potassium hydride (4.3) into a potassium hydroxide solution, dissolved in water and diluted to 250mL, and mix with a time of existing service.
4.8 potassium borohydride (0.01%) mixed solution. Weigh 0.0125g of potassium hydroxide (4.4) into a beaker, dissolved in a small amount of water, weighed 0.025g of potassium borohydride (4.3) into a potassium hydroxide solution, dissolved in water and diluted to 250mL, and mix with a time of existing service.
4.9 Pre reducing agent solution (10% thiourea, 10% ascorbic acid). Weigh 10.0g of thiourea and 10.0g ascorbic acid dissolved in water, diluted with water Diluted to 100mL, the time is now equipped with.
4.10 As, Hg single element standard stock solution (1000µg/mL). Each standard solution according to GB/T 602 method of preparation, or directly National Standard purchased.
4.11 arsenic standard solution. take arsenic standard stock solution (4.10) added to the pre-reducing agent solution (4.9) so that all the pre-standard series solution also Reducing agent concentration of 1%, progressively diluted hydrochloric acid solution (4.5) into 0.0,2.0,4.0,6.0,8.0,10.0µg/L, the time is now equipped with.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.
Referenced standards
How to Download SN/T 3370-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 602-1988 — Chemical reagent--Preparations of stock standard solutions
GB/T 602-2002 — Chemical reagent - Preparations of standard solutions for impurity
GB/T 602-2026 — Chemical reagent - Preparation of standard solutions for impurity determination
SN/T 3370-2012
$149.00