SN/T 3368-2012Determination of phosphorus content in carbon steel and low-middle alloy steel. Phosphomolybdate blue spectrophotometric method (English PDF)
碳钢、中低合金钢中磷含量的测定 磷钼蓝分光光度法
This is a limited preview
Buy now to download the full PDF (4 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3368-2012 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
December 12, 2012
Implementation date
July 1, 2013
Scope
SN/T 3368-2012 is the English-translated version of 碳钢、中低合金钢中磷含量的测定 磷钼蓝分光光度法.
SN/T 3368-2012 - This standard specifies the phosphorus molybdenum blue spectrophotometric determination of carbon steel, low alloy steel phosphorus content approach.
This standard applies to carbon steel, low alloy steel in the determination of phosphorus content was measured in the range of 0.005% to 0.15% carbon, low-alloy steel 0.005% to 0.10%.
Found what you need?
Document preview — SN/T 3368-2012
National Standard of the People's Republic of China
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 Reagents and materials
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. Tianjin People's Republic of China Exit Inspection and Quarantine.
1 Scope
This standard specifies the phosphorus molybdenum blue spectrophotometric determination of carbon steel, low alloy steel phosphorus content approach.
This standard applies to carbon steel, low alloy steel in the determination of phosphorus content was measured in the range of 0.005% to 0.15% carbon, low-alloy steel 0.005% to 0.10%.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
Preparation of standard solution of GB/T 602 Determination of impurities in chemical reagents GB/T 6379.2 measurement methods and results of Accuracy (trueness and precision) - Part 2. Determine the standard measurement method to repeat and basic methods of reproduction Laboratory use specifications and test methods GB/T 6682 Analysis GB/T 20066 Steel and iron - Sampling and determination of the chemical composition of the sample with a sample preparation method
3 Method summary
Carbon perchloric acid sample dissolution, low alloy steel with nitric acid - hydrochloric acid mixed acid, perchloric acid decomposition sample in sulfuric acid and molybdic acid Ammonium form a yellow complex with stannous chloride to restore phosphorus molybdenum blue absorbance was measured on a spectrophotometer at the wavelength of 660nm at.
4 Reagents and materials
Unless otherwise indicated, the reagents used were of analytical grade reagent water to comply with two water GB/T 6682 regulations.
4.1 perchloric acid (rho = 1.67g/mL).
4.2 sulfate (rho = 1.84g/mL).
4.3 nitric acid (rho = 1.42g/mL).
4.4 hydrochloric acid (rho = 1.19g/mL).
4.5 perchloric acid (11).
4.6 sulfate (114).
4.7 sulfate (124).
4.8 nitric acid - mixing hydrochloric acid. amount of 100mL nitric acid (4.3), was added to 200mL of hydrochloric acid (4.4), and mix well.
4.9 sodium sulfite solution (10%). Weigh 10g of sodium sulfite, dissolved in 60mL water, dilute with water to 100mL.
4.10 ammonium molybdate solution (5%). Weigh 5g of ammonium molybdate was dissolved in 60mL water, dilute with water to 100mL.
4.11 sodium fluoride solution (2.4%). Weigh 2.4g of sodium fluoride, dissolved in 60mL water, dilute with water to 100mL.
Sodium Fluoride 4.12 - Stannous chloride solution. 100mL sodium fluoride (4.11) was added 0.2g of stannous chloride, formulated with time.
4.13 P standard stock solution (100µg/mL). according to GB/T 602 formulated or direct purchase of certified reference materials.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 602Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 6379.2Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 20066Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
How to Download SN/T 3368-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 20066-2006 — Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
GB/T 602-1988 — Chemical reagent--Preparations of stock standard solutions
GB/T 602-2002 — Chemical reagent - Preparations of standard solutions for impurity
SN/T 3368-2012
$129.00