Valid

SN/T 3351-2012Determination of bisphenol A in epoxy resin adhesives used in buliding for import and export (English PDF)

进出口建筑用环氧树脂粘接剂中双酚A的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (7 pages)

Need quotation for your management?

Get a formal quotation for SN/T 3351-2012 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

December 12, 2012

Implementation date

July 1, 2013

Scope

SN/T 3351-2012 is the English-translated version of 进出口建筑用环氧树脂粘接剂中双酚A的测定.

SN/T 3351-2012 - This standard specifies two methods for determining the import and export building of bisphenol A epoxy resin adhesive, the method comprising a first liquid chromatography - mass spectrometry /Mass spectrometry (LC-MS/MS) method and the second high performance liquid chromatography (HPLC).

Wherein the first normal liquid chromatography - mass spectrometry/mass spectrometry for the arbitration law. This standard is applicable to the determination of the import and export of bisphenol A epoxy resin adhesives in.

Found what you need?

Document preview — SN/T 3351-2012

National Standard of the People's Republic of China

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 First normal liquid chromatography - mass spectrometry/mass spectrometry (LC-MS/MS)
  • 3.1 Principle
  • 3.2 Reagents and materials
  • 3.3 Instruments and equipment
  • 3.4 Analysis Steps

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard was drafted. Xiamen, People's Republic of China Exit Inspection and Quarantine.

1 Scope

This standard specifies two methods for determining the import and export building of bisphenol A epoxy resin adhesive, the method comprising a first liquid chromatography - mass spectrometry /Mass spectrometry (LC-MS/MS) method and the second high performance liquid chromatography (HPLC). Wherein the first normal liquid chromatography - mass spectrometry/mass spectrometry for the arbitration law.

This standard is applicable to the determination of the import and export of bisphenol A epoxy resin adhesives in.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

Laboratory use specifications and test methods GB/T 6682 Analysis

3 First normal liquid chromatography - mass spectrometry/mass spectrometry (LC-MS/MS)

3.1 Principle

Samples with ethanol ultrasonic extraction, extract was filtered by liquid chromatography - mass spectrometry/mass spectrometry and validation, external standard.

3.2 Reagents and materials

Unless otherwise specified, the reagents were of analytical grade water as a water line with GB/T 6682 regulations.

3.2.1 acetonitrile. chromatography.

3.2.2 Ethanol. chromatography.

3.2.3 Bisphenol A (CAS No. 80-05-7). purity >=98%.

3.2.4 Standard stock solution (1000mg/L). Weigh accurately bisphenol A (3.2.3) 0.10g (accurate to 0.0001g), placed in 100mL capacity Volumetric flask, dissolve and dilute with ethanol (3.2.2).

3.2.5 standard solution. Pipette appropriate amount of standard stock solution (3.2.4), diluted to standard working solution with a suitable concentration of ethanol (3.2.2).

3.2.6 The organic phase filter. 0.22µm.

3.3 Instruments and equipment

3.3.1 Liquid chromatography - tandem mass spectrometry. equipped with electrospray ionization source.

3.3.2 vortex mixer.

3.3.3 ultrasonic cleaner (power >=220W).

3.3.4 centrifuge. speed of not less than 4000r/min.

3.3.5 Electronic balance. a sense of the amount of 0.1mg.

3.4 Analysis Steps

3.4.1 Extraction

Said sample after mixing learn about 0.20g (accurate to 0.0001g), placed in 50mL tube with a stopper colorimetric, diluted with ethanol (3.2.2) to

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 3351-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
7 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 3351-2012

$229.00