SN/T 3345-2012Determination of the elements of chromium, nickel, vanadium, molybdenum, copper, manganese, titanium, aluminium, magnesium, zinc and calcium in stainless steel waste and scrap. Inductively coupled plasma atomic emission specrometry (English PDF)
废不锈钢中铬、镍、钒、钼、铜、锰、钛、铝、镁、锌、钙含量的测定 电感耦合等离子体原子发射光谱法
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3345-2012 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
December 12, 2012
Implementation date
July 1, 2013
Scope
SN/T 3345-2012 is the English-translated version of 废不锈钢中铬、镍、钒、钼、铜、锰、钛、铝、镁、锌、钙含量的测定 电感耦合等离子体原子发射光谱法.
SN/T 3345-2012 - This standard specifies the Determination of chromium in stainless steel scrap, nickel, vanadium, molybdenum, copper, manganese, titanium, aluminum, magnesium and inductively coupled plasma atomic emission, Zinc, calcium content of the test method.
This standard applies to the determination of scrap stainless steel plate chromium, nickel, vanadium, molybdenum, copper, manganese, titanium, aluminum, magnesium, zinc, calcium content (band).
See measurement range Table 1. This standard specifies the aluminum is dissolved aluminum.
Table 111 elements measuring range element Content range (mass fraction) Cr 5.00 ~ 25.00 Ni 0.50 ~ 25.00 V 0.05 ~ 1.00 Mo 0.05 ~ 4.00 Cu 0.05 ~ 5.00 Mn 0.50 ~ 15.00 element Content range (mass fraction) Ti 0.05 ~ 1.00 Al 0.05 ~ 1.00 Mg 0.05 ~ 1.00 Zn 0.05 ~ 1.00 Ca 0.05 ~ 1.00
Found what you need?
Document preview — SN/T 3345-2012
National Standard of the People's Republic of China
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 Reagents and materials
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Zhuhai Entry-Exit Inspection and Quarantine Bureau.
1 Scope
This standard specifies the Determination of chromium in stainless steel scrap, nickel, vanadium, molybdenum, copper, manganese, titanium, aluminum, magnesium and inductively coupled plasma atomic emission, Zinc, calcium content of the test method.
This standard applies to the determination of scrap stainless steel plate chromium, nickel, vanadium, molybdenum, copper, manganese, titanium, aluminum, magnesium, zinc, calcium content (band). See measurement range
Table 1.
This standard specifies the aluminum is dissolved aluminum.
Table 111 elements measuring range
element
Content range (mass fraction) Cr 5.00 ~ 25.00 Ni 0.50 ~ 25.00 V 0.05 ~ 1.00 Mo 0.05 ~ 4.00 Cu 0.05 ~ 5.00 Mn 0.50 ~ 15.00 element Content range (mass fraction) Ti 0.05 ~ 1.00 Al 0.05 ~ 1.00 Mg 0.05 ~ 1.00 Zn 0.05 ~ 1.00 Ca 0.05 ~ 1.00
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6682 analytical laboratory use specifications and test methods GB/T 20066 Steel and iron - Sampling and determination of the chemical composition of the sample with a sample preparation method JJG015 inductively coupled plasma atomic emission spectrometer verification procedures SN/T 1733.7 identify non-genuine steel test procedures Part 7. Stainless steel plate (with)
3 Method summary
Hydrochloric acid is heated, dissolved and diluted to the volume determined to yttrium as internal standard, the sample solution is injected into the plasma flame, and - the sample with nitric acid in this light source, at a wavelength corresponding elements in plasma spectrometer to measure the intensity of light to determine the content of its internal standard method from the standard curve.
4 Reagents and materials
Unless otherwise indicated in the analysis using only high-quality pure reagents and in line with two water GB/T 6682 regulations.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 20066Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
- SN/T 1733.7Rules for the inspection of non-prime steel material. Part 7: Stainless steel plates, sheets and strip
JJG015
How to Download SN/T 3345-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 20066-2006 — Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
SN/T 3345-2012
$189.00