Valid

SN/T 3343-2012Determination of manganese, phosphorus, silicon, chromium, nickel, copper, molybdenum, and titanium in Stainless steel. Inductively coupled plasma atomic emission spectrometry (English PDF)

不锈钢中锰、磷、硅、铬、镍、铜、钼和钛含量的测定 电感耦合等离子体原子发射光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (6 pages)

Need quotation for your management?

Get a formal quotation for SN/T 3343-2012 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

December 12, 2012

Implementation date

July 1, 2013

Scope

SN/T 3343-2012 is the English-translated version of 不锈钢中锰、磷、硅、铬、镍、铜、钼和钛含量的测定 电感耦合等离子体原子发射光谱法.

SN/T 3343-2012 - This standard specifies the inductively coupled plasma atomic stainless steel manganese, phosphorus, silicon, chromium, nickel, copper, molybdenum and titanium emission spectrometer method.

This standard applies to the determination of carbon content of not more than 0.20% of the stainless steel manganese, phosphorus, silicon, chromium, nickel, copper, molybdenum and titanium content.

Measurement Table 1 given range. The silicon standard assay for soluble silicon. Table 1 Determination of elements content range element Content range (mass fraction) element Content range (mass fraction) Mn 0.01 ~ 10 P 0.003 ~ 0.25 Si 0.01 ~ 2 Cr 0.02 ~ 30 Ni 0.01 ~ 30 Cu 0.01 ~ 5 Mo 0.01 ~ 5 Ti 0.01 ~ 1

Found what you need?

Document preview — SN/T 3343-2012

National Standard of the People's Republic of China

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Method summary
  • 4 Reagents and materials

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau.

1 Scope

This standard specifies the inductively coupled plasma atomic stainless steel manganese, phosphorus, silicon, chromium, nickel, copper, molybdenum and titanium emission spectrometer method.

This standard applies to the determination of carbon content of not more than 0.20% of the stainless steel manganese, phosphorus, silicon, chromium, nickel, copper, molybdenum and titanium content. Measurement

Table 1 given range.

The silicon standard assay for soluble silicon.

Table 1 Determination of elements content range

element

Content range (mass fraction) element Content range (mass fraction) Mn 0.01 ~ 10 P 0.003 ~ 0.25 Si 0.01 ~ 2 Cr 0.02 ~ 30 Ni 0.01 ~ 30 Cu 0.01 ~ 5 Mo 0.01 ~ 5 Ti 0.01 ~ 1

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

Preparation of standard solution of GB/T 602 Determination of impurities in chemical reagents GB/T 6682 analytical laboratory use specifications and test methods GB/T 20066 Steel and iron - Sampling and determination of the chemical composition of the sample with a sample preparation method

3 Method summary

Samples with hydrochloric acid - nitric acid mixture dissolved, yttrium internal standard element After cooling, diluted to determine the volume of the sample solution is introduced into the plasma Atomic emission spectrometer to measure the wavelength corresponding elements in its emission intensity, measured by elemental analysis to calculate emission intensity line and the internal standard line emission intensity the ratio of the degree, according to the standard curve to determine the amount of analyte.

4 Reagents and materials

Unless otherwise indicated in the analysis using only recognized as analytical reagents and GB/T 6682 provisions of secondary water.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 3343-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
6 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 3343-2012

$115.00