SN/T 3326.1-2012Technical requirements for the inspection of lighting apparatus for import and export. Part 1: Energy efficiency for self-ballasted lamps (English PDF)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3326.1-2012 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
December 12, 2012
Implementation date
July 1, 2013
Scope
SN/T 3326.1-2012 (Technical requirements for the inspection of lighting apparatus for import and export. Part 1: Energy efficiency for self-ballasted lamps) is available as an English-translated PDF.
SN/T 3326.1-2012 - SN/T 3326 provisions of this part of the import and export self-ballasted fluorescent energy efficiency requirements, test methods, inspection and test results and determination Substandard batches disposal.
This section applies to imports of rated voltage 220V, frequency 50Hz, nominal power of 60W and below, the use of screw caps or bayonet cap in domestic and similar general lighting purposes, and to control the start and stable ignition components are integrated self-ballasted fluorescent lamps.
This section applies to the EU's exports to the rated voltage 100V to 250V, the nominal power of 60W and below, or use screw caps Bayonet cap in domestic and similar general lighting purposes, and to control the start and stable ignition components are integrated self-ballasted fluorescent lamps.
This section applies to affix the Energy Star mark. -- Medium-sized or small threaded screw base lamp with integral electronic ballasts for compact fluorescent lamps; -- Tested and packaged with electronic ballast and square ring light lamps, these lamps with electronic ballasts medium screw base and and the maximum diameter 9in, the maximum side length 8in; -- With translucent cover and the overall electronic ballast fluorescent tube lamp screw base for medium-sized or small screw base. light Cover can be spherical, bullet-shaped, pear-shaped, torpedo, candle-type or other shapes; -- Compact fluorescent lamps with integral electronic ballasts, which cap for medium screw base and having an open or closed counter Cover shoot.
Found what you need?
Document preview — SN/T 3326.1-2012
National Standard of the People's Republic of China
- ICS
- 29.140.30
- Classification
- K72
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
Foreword
SN/T 3326 "Import and Export Inspection Lighting technical requirements" is divided into three parts.
--- Part 1. Self-ballasted fluorescent energy efficiency;
--- Part 2. incandescent reflector lamp energy efficiency;
--- Part 3. double-ended fluorescent lamps energy efficiency.
This section SN/T Section 13326 of.
This section drafted in accordance with GB/T 1.1-2009 given rules.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
1 Scope
SN/T 3326 provisions of this part of the import and export self-ballasted fluorescent energy efficiency requirements, test methods, inspection and test results and determination Substandard batches disposal.
This section applies to imports of rated voltage 220V, frequency 50Hz, nominal power of 60W and below, the use of screw caps or bayonet cap in domestic and similar general lighting purposes, and to control the start and stable ignition components are integrated self-ballasted fluorescent lamps.
This section applies to the EU's exports to the rated voltage 100V to 250V, the nominal power of 60W and below, or use screw caps Bayonet cap in domestic and similar general lighting purposes, and to control the start and stable ignition components are integrated self-ballasted fluorescent lamps.
This section applies to affix the Energy Star mark.
--- Medium-sized or small threaded screw base lamp with integral electronic ballasts for compact fluorescent lamps;
--- Tested and packaged with electronic ballast and square ring light lamps, these lamps with electronic ballasts medium screw base and and the maximum diameter 9in, the maximum side length 8in;
--- With translucent cover and the overall electronic ballast fluorescent tube lamp screw base for medium-sized or small screw base. light Cover can be spherical, bullet-shaped, pear-shaped, torpedo, candle-type or other shapes;
--- Compact fluorescent lamps with integral electronic ballasts, which cap for medium screw base and having an open or closed counter Cover shoot.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 17263-2002 general lighting self-ballasted fluorescent lamps - Performance requirements GB 19044 for general lighting self-ballasted fluorescent energy efficiency limit value and energy efficiency rating the basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared CEL-005 self-ballasted fluorescent energy-efficiency labeling rules EN60969:1993 A1.1993 A2.2000 for general lighting self-ballasted fluorescent lamps - Performance requirements (Self-balastedlamps forgenerallightingservices-Performancerequirements) Licensing method IESN ALM66-00 single-ended compact fluorescent lamps electrical and photometric measurements (Approvedmethodforthe electricalandphotometricmeasurementsofsingle-endedcompactfluorescentlamps) Licensing method IESN ALM-65 single-ended compact fluorescent lamp life test (Approvedmethodforlifetestingof compactfluorescentlamps) IESN ALM-28 photometric laboratory of electrical equipment selection, maintenance and use of guidelines (Guidefortheselection, care, anduseofelectricallnstrumentsinthephotometriclaboratory) Licensing method IESN A-LM-41 photometric tests indoors under fluorescent (Approvedmethodforphotometrictestingof indoorfluorescentluminaires) IESN ALM-54-99 Light Aging Guide (Guidetolampseasoning) IESN ALM-9 electronic fluorescent and photometry (Approvedmethodforelectricphotometricmeasurementof
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 17263-2002Self-ballasted lamps for general lighting service - Performance specifications
- GB 19044Minimum allowable values of energy efficiency and energy efficiency grades of fluorescent lamps for general lighting
- SN/T 0002General rules for drafting of regulations for inspection of import and export mechanical and electrical commodity
CEL-005 · EN 60969-1993 + A1-1993 + A2-2000 · LESNA LM 66-00 · LESNA LM-65 · LESNA LM-28 · LESNA LM -41 · LESNA LM-54-99 · LESNA LM-9 · LESNA LM-40 · ANSI C78.5 · CIE 13.3-1995 · CIE 97-2005 · (EC) NO 244/2009
How to Download SN/T 3326.1-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 19044-2022 — Minimum allowable values of energy efficiency and energy efficiency grades of fluorescent lamps for general lighting
SN/T 0002.1-2012 — General rules for drafting of regulations for inspection of import and export mechanical and electrical commodity
SN/T 0002.2-2012 — General stipulation for drafting of standards on inspection method of mechanical and electrical commodity for import and export
Secure payment via Stripe
Payments accepted
SN/T 3326.1-2012
$469.00