SN/T 3318.1-2012Chemical analysis of zircon. Part 1: Determination of Thorium, Uranium. Inductively coupled plasma atomic emission spectrometry (English PDF)
锆英砂化学分析方法 第1部分:钍、铀含量的测定 电感耦合等离子体原子发射光谱法
This is a limited preview
Buy now to download the full PDF (6 pages)
Need quotation for your management?
Get a formal quotation for SN/T 3318.1-2012 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
December 12, 2012
Implementation date
July 1, 2013
Scope
SN/T 3318.1-2012 is the English-translated version of 锆英砂化学分析方法 第1部分:钍、铀含量的测定 电感耦合等离子体原子发射光谱法.
SN/T 3318.1-2012 - SN/T 3318 This section provides an inductively coupled plasma atomic emission spectrometry (ICP-AES) Determination of the import and export of thorium zircon sand, the method of uranium content.
This section applies to the import and export of zircon sand thorium, uranium content determination, the detection limit of the elements are as follows. 0.011% thorium, uranium 0.018%.
Found what you need?
Document preview — SN/T 3318.1-2012
National Standard of the People's Republic of China
- Classification
- Q40
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 4 Reagents and materials
Foreword
This section SN/T 3318 Part 1.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
1 Scope
SN/T 3318 This section provides an inductively coupled plasma atomic emission spectrometry (ICP-AES) Determination of the import and export of thorium zircon sand, the method of uranium content.
This section applies to the import and export of zircon sand thorium, uranium content determination, the detection limit of the elements are as follows. 0.011% thorium, uranium 0.018%.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
Laboratory use specifications and test methods GB/T 6682 Analysis Principle 3 Sample with sodium carbonate - mixing borax flux melting frit leaching with hydrochloric acid, and diluted to a predetermined volume. Inductively coupled plasma Atomic emission spectrometer intensity measured elements, according to the standard solution prepared working curve calculated from the concentration of each element. Then according to the concentration Degree, the quality of the sample and the sample solution volume, calculate the amount of each element in a sample.
4 Reagents and materials
Unless otherwise indicated, the reagents used were of analytical grade, water as a secondary water GB/T 6682 regulations.
4.1 hydrochloric acid (rho = 1.19g/mL).
4.2 thorium standard solution (national certified reference material). 1000µg/mL.
4.3 uranium standard solution (national certified reference material). 100µg/mL.
4.4 zirconium oxychloride.
4.5 sodium carbonate.
4.6 borax.
4.7 hydrochloride (13).
4.8 Zr substrate solution (1mg/mL). Weigh 3.53g of zirconium oxychloride (4.4), was added 50mLHCl (1 3) (4.7), dissolved by heating, will be Capacity in 1000mL volumetric flask.
4.9 mixed flux. Weigh sodium carbonate (4.6), borax (4.7) by mass ratio of 1/1 were mixed and finely ground, into a plastic bottle into the dryer Saved.
4.10 curve solution. Add 40mL zirconium matrix solution (4.8) in a 100mL flask, 30mLHCl (4.7), 0.8g Mixed flux (4.9), respectively, and then draw a certain amount of each standard solution (4.2, 4.3) in the flask, diluted with water to the mark. Wait
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.
Referenced standards
Normative references
How to Download SN/T 3318.1-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
SN/T 3318.2-2015 — Chemical analysis of zirconium sand - Part 2: Determination of zirconium, iron and titanium contents - Wavelength dispersion X-ray fluorescence spectrometric method
SN/T 3318.1-2012
$169.00