Valid

SN/T 2638.5-2013Determination of arsenic andmercury content in manganese ore. Microwave digestion-atomic fluorescence spectrometry method (English PDF)

锰矿中砷、汞元素测定微波消解-原子荧光光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (8 pages)

Need quotation for your management?

Get a formal quotation for SN/T 2638.5-2013 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

November 6, 2013

Implementation date

June 1, 2014

Scope

SN/T 2638.5-2013 is the English-translated version of 锰矿中砷、汞元素测定微波消解-原子荧光光谱法.

SN/T 2638.5-2013 - This section SN/T 2638 provisions microwave digestion - manganese arsenic, mercury method for determination of atomic fluorescence spectrometry.

This section applies to arsenic, manganese determination of mercury. Measurement range. arsenic detection limit of 10µg/g, mercury detection limit of 0.1µg/g.

Found what you need?

Document preview — SN/T 2638.5-2013

National Standard of the People's Republic of China

ICS
73.060.20
Classification
D32

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 4 Reagents

Foreword

SN/T 2638 is divided into five sections.

--- Part 1. Determination of the wavelength of the import and export of manganese ores, iron, silicon, aluminum, calcium, magnesium, titanium, potassium and phosphorus elemental dispersive X-ray fluorescence Optical spectroscopy;

--- Part 2. Import-export manganese ore of iron, measured inductance aluminum, magnesium, calcium, titanium, phosphorus, nickel, copper, zinc coupled plasma atomic hair Emission spectrometry;

--- Part 3. Determination of manganese ore and export high-temperature sulfur content of combustion infrared absorption method;

--- Part 4. Determination of manganese ore and export of sulfur content in the high-frequency induction furnace combustion infrared absorption method;

--- Part 5. manganese arsenic, mercury was measured by microwave digestion - atomic fluorescence spectrometry.

This section SN/T 2638 Part 5.

This section drafted in accordance with GB/T 1.1-2009 given rules.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

This section is drafted. Tianjin People's Republic of China Exit Inspection and Quarantine.

1 Scope

This section SN/T 2638 provisions microwave digestion - manganese arsenic, mercury method for determination of atomic fluorescence spectrometry.

This section applies to arsenic, manganese determination of mercury. Measurement range. arsenic detection limit of 10µg/g, mercury detection limit of 0.1µg/g.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2011 manganese ore bulk sampling and sample preparation method GB/T 6379.2 measurement methods and results of Accuracy (trueness and precision) - Part 2. Determine the standard measurement repeatability and basic methods of reproduction Laboratory use specifications and test methods GB/T 6682 Analysis GB/T 12806 Laboratory glassware single marking flask GB/T 12808 Laboratory glassware single marking pipette JJG939 Atomic Fluorescence Spectrometer Principle 3 Using hydrochloric acid, nitric acid digestion ore samples in a closed vessel microwave digestion. According to the solution of arsenic and mercury concentrations were diluted test solution. The determination of arsenic First with the pre-reducing agent in the test solution As (V) reduced to As (III), you do not need pre-measured mercury reduction. By hydride generation - atomic fluorescence Spectrometry determination of arsenic, mercury content.

4 Reagents

Unless otherwise indicated, the reagents used were of analytical grade reagents, test water for the two water in line with GB/T 6682 regulations.

4.1 ascorbic acid. pure class distinctions.

4.2 thiourea. pure class distinctions.

4.3 potassium borohydride. pure class distinctions.

4.4 boric acid. pure class distinctions.

4.5 Potassium hydroxide. pure class distinctions.

4.6 hydrochloric acid (rho = 1.19g/mL). pure class distinctions.

4.7 nitric acid (rho = 1.42g/mL). pure class distinctions.

4.8 hydrofluoric acid (rho = 1.12g/mL). pure class distinctions.

4.9 saturated boric acid solution. the preparation of the boronic acid (4.4).

4.10 ascorbic acid solution (50g/L). Weigh 10g ascorbic acid (4.1), dissolved in water and diluted to 200mL, using now.

4.11 thiourea - ascorbic acid solution (100g/L). Weigh 10g of thiourea (4.2) 10g ascorbic acid (4.1), and diluted with water to dissolve

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 2638.5-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
8 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 2638.5-2013

$165.00