SN/T 2412.1-2012General rules for the inspection of import and export steel products. Part1: Overall requirements (English PDF)
进出口钢材通用检验规程 第1部分:-般要求
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for SN/T 2412.1-2012 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
October 23, 2012
Implementation date
May 1, 2013
Scope
SN/T 2412.1-2012 is the English-translated version of 进出口钢材通用检验规程 第1部分:-般要求.
SN/T 2412.1-2012 - This section SN/T 2412 specifies the test content and export of steel, inspection procedures and methods and results determined. This section applies to generic test sheet (strip), bar, pipe, wire, steel, billet and export steel.
Found what you need?
Document preview — SN/T 2412.1-2012
National Standard of the People's Republic of China
- Classification
- H40
Issued by: General Administration of Customs
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Test content
Foreword
This section SN/T 2412 Part 1.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
1 Scope
This section SN/T 2412 specifies the test content and export of steel, inspection procedures and methods and results determined.
This section applies to generic test sheet (strip), bar, pipe, wire, steel, billet and export steel.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
SN/T 1323 sampling procedures and export of metal materials SN/T 2412.3 General inspection of import and export steel products - Part 3. Sampling location and size SN/T 2412.4 General inspection of import and export steel products - Part 4. sample preparation requirements
3 Terms and Definitions
The following terms and definitions apply to this document.
Steel steelproducts
Smelting of steel is processed into various shapes of final products, mainly in the form of steel plate (with), bar, pipe, wire, steel, steel such as billet.
Test inspection
Through observation, measurement, test and measurement and other means, to determine the extent of the product to meet the specified requirements.
Inspection Lot the same batch inspection of the same manufacturer, same name, same brand, same specification steel.
First test initialinspection First inspection by a specific method of test batches.
Reinspection on the basis of early experience on inspection of the original consignment predetermined proportion of the expanded sample.
4 Test content
4.1 Import and Export of steel test based on technical specifications, including national mandatory requirements, technical regulations, China's import and export country (region) signed Agreement, technical specifications and standards and export commodity inspection methods, standards or trade contracts.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
- SN/T 1323Rules for the sampling of metal material for import and export
- SN/T 2412.3General rules for the inspection of import and export steel products. Part 3: Sampling position and size
- SN/T 2412.4General rules for the inspection of import and export steel products. Part 4: Requirement for sample preparation
How to Download SN/T 2412.1-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SN/T 1323-2003 — Rules for the sampling of metal material for import and export
SN/T 2412.3-2010 — General rules for the inspection of import and export steel products. Part 3: Sampling position and size
SN/T 2412.4-2010 — General rules for the inspection of import and export steel products. Part 4: Requirement for sample preparation
SN/T 2412.1-2012
$189.00