SN/T 1795.3-2007Rules for the inspection of used electrical and mechanical products for import. -Part 3: hydraulic excavators (English PDF)

Foreword

SN/T 1795 "imported old mechanical and electrical products inspection regulations" is divided into three parts.

--- Part 1. General requirements;

--- Part 2. pre-shipment inspection;

--- Part 3. hydraulic excavators.

This section SN/T 1795 "imported old mechanical and electrical products inspection regulations" in Part 3.

This section is informative Appendix A Appendix.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

This section is drafted. Shenzhen Entry-Exit Inspection and Quarantine, Guangdong, Zhuhai Entry-Exit Inspection and Quarantine Bureau, the Shanghai Entry Inspection and Quarantine Bureau, China Construction Machinery Association excavator branch.

Introduction

"Inspection of imported used machinery and electronic products - Part 3. Hydraulic excavator" imported old excavator inspection work based on the import of used digging Excavators inspection play a guiding and regulating.

With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection Test mode has undergone great changes, and changes in order to adapt to the situation, the state department in charge of inspection and quarantine inspection and quarantine standards organization established system.

This part belongs to the standard system of inspection and quarantine fourth floor --- personality standard specifies requirements for import of old excavator test.

Import of used mechanical and electrical products inspection regulations Part 3. Hydraulic excavator

1 Scope

SN/T 1795 This section provides the following tire imports 90t, old crawler hydraulic excavator (hereinafter referred to as old excavator) to Requirements, inspection and determination, and other specifications of the old excavator, hydraulic excavator with dozing old features, the old hydraulic cutting machine, hydraulic log loaders old Etc. can be implemented by reference.

This section refers to the alleged old excavator excavators have one of the following circumstances.

--- After use, still have the basic functions and certain use-value;

--- Unused, but long time storage, more than the warranty period or significant part of the loss;

--- Mix of old and new member;

--- Reconditioned, refurbished.

2 Normative references

The following documents contain provisions which, through reference SN/T 1795 this section, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1:1999, IDT) GB 5226.1-2002 Safety of machinery electrical equipment Part 1. General requirements (idt IEC 60204-1:2000) GB/T 7586 Test methods for hydraulic excavators GB/T 9139.1 hydraulic excavator category GB/T 9139.2 Hydraulic Excavator Condition GB 16710.1-1996 Noise limits Construction Machinery JB6028 Construction Machinery Safety signs and hazard pictorials General JB6030-2001 Construction Machinery General Safety Requirements

3 Terms and Definitions

GB/T 2828.1, GB 5226.1, GB/T 9139.1, GB/T 9139.2, GB/T 7586, GB 16710.1, JB6030, JB6028 and SN/T 0002 and established the following terms and definitions apply to SN/T 1795 of this part.

4 General requirements

Old excavator inspection general requirements include.