SN/T 1731.9-2012Safety performance test for pyrotechnic composition used for export fireworks and firecracker. Part 9: Test method for flame sensitivity (English PDF)

Foreword

SN/T 1731 "Fireworks and firecrackers for export fireworks safety performance test method" is divided into 10 parts.

- Part 1. General;

Part 2. Determination of thermal stability at 75 ° C;

Part 3. Determination of burst points;

- Part 4. Restriction of qualitative analysis of restricted drugs;

- Part 5. Determination of impact sensitivity;

- Part 6. Determination of friction sensitivity;

- Part 7. Determination of hygroscopicity;

- Part 8. Determination of ignition temperature;

- Part 9. Flame sensitivity test method;

Part 10. Test method for static spark sensitivity.

This part is part 9 of the SN/T 1731 "Test Method for the Safety Performance of Pyrotechnic Explosives for Export Fireworks and Firecrackers".

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

This part of the State Certification and Accreditation Administration Committee proposed and centralized.

This part of the drafting unit. Hunan People's Republic of China Entry - Exit Inspection and Quarantine Bureau.

1 Scope

This part of SN/T 1731 specifies the test method for the flame sensitivity of pyrotechnic fuels for export fireworks.

This part is applicable to the test of flame sensitivity of pyrotechnic agents for export fireworks.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GJB770A604.1 Flame Sensitivity Black Powder Method Code for inspection of fireworks and firecrackers for export - Part 4. Safety inspection

3 Terms, definitions and symbols

The terms, definitions and symbols identified in SN/T 0306.4 and GJB770A604.1 apply to this document.

4 Test method