SN/T 1730.7-2006Safety performance test for export fireworks and firecrackers. Part 7: Package (English PDF)
出口烟花爆竹安全性能检验方法 第7部分:包装鉴定
This is a limited preview
Buy now to download the full PDF (4 pages)
Need quotation for your management?
Get a formal quotation for SN/T 1730.7-2006 in 30 minutes.
Issued by
The General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Recommended
Issue date
January 26, 2006
Implementation date
August 16, 2006
Scope
SN/T 1730.7-2006 is the English-translated version of 出口烟花爆竹安全性能检验方法 第7部分:包装鉴定.
SN/T 1730.7-2006 — This part of SN/T 1730 specifies the identification requirements and identification methods for exporting fireworks and firecrackers. This section applies to the identification of export fireworks and firecrackers.
Found what you need?
Document preview — SN/T 1730.7-2006
National Standard of the People's Republic of China
- ICS
- 71.100.30
- Classification
- G 89
Issued by: The General Administration of Quality Supervision, Inspection and Quarantine
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Identification requirements
- 4.1 Classification of hazard levels
- 4.2 Packaging category
- 4.3 Explosion mark
- 4.4 Mark
- 4.5 Weight limit
- 4.6 Leakage
- 4.7 Clearance regulations between the product and the inner box
Foreword
SN/T 1730 "Safety Performance Test Method for Export Fireworks and Firecrackers" is divided into.
--- Part 1. General;
--- Part 2. 75 ° C thermal stability test;
--- Part 3. Low temperature stability test;
---Part 4. Anti-vibration test;
--- Part 5. Drop test;
--- Part 6. Explosion test;
--- Part 7. Packaging identification;
--- Part 8. Product drug testing;
--- Part 9. Aphorism label inspection;
--- Part 10. Use safety performance test.
This part is part 7 of the SN/T 1730.
This part is proposed and managed by the National Certification and Accreditation Administration.
This section drafted by. Jiangxi Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Henan Province Entry and Exit Inspection Epidemic situation.
1 Scope
This part of SN/T 1730 specifies the identification requirements and identification methods for exporting fireworks and firecrackers.
This section applies to the identification of export fireworks and firecrackers.
2 Normative references
The terms in the following documents become the provisions of this section by reference to this part of SN/T 1730. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section the parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section.
GB 19269.3 Road transport dangerous goods packaging inspection safety specification use identification SN/T 0372 Air transport export dangerous goods packaging inspection procedures use identification SN 0449.3 Marine export dangerous goods packaging inspection procedures use identification SN/T 0805.3 Railway transportation export dangerous goods packaging inspection procedures use identification SN/T 1725 export fireworks and firecracker terminology SN/T 1727 export fireworks and firecracker hazard classification method
3 Terms and definitions
The terms and definitions established by SN/T 1725 apply to this part of SN/T 1730.
4 Identification requirements
4.1 Classification of hazard levels
Export fireworks and firecrackers should be classified and tested to determine the level of hazard. The classification method can be specified in SN/T 1727.
4.2 Packaging category
Export fireworks and firecracker products should be packaged in Class II or Class I packaging.
4.3 Explosion mark
The explosion mark shall be appropriate to the hazard level of the exported fireworks and firecracker products.
4.4 Mark
The markings and production batch numbers printed on the package should be firm and clear.
4.5 Weight limit
The gross weight of a single piece shall not exceed the maximum gross weight determined during performance testing.
4.6 Leakage
Do not leak medicine in the package.
4.7 Clearance regulations between the product and the inner box
The product should be fixed and not loose.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.
Referenced standards
Normative references
- SN/T 1725Terms of fireworks and firecrackers for export
- SN/T 1727Assignation of harzard classification of fireworks and firecrackers for export
SN/T 1730 · GB 19269.3 · SN/T 0372 · SN 0449.3 · SN/T 0805.3
How to Download SN/T 1730.7-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SN/T 1725-2006 — Terms of fireworks and firecrackers for export
SN/T 1727-2006 — Assignation of harzard classification of fireworks and firecrackers for export
SN/T 1730.1-2006 — Safety performance test for export fireworks and firecrackers. Part 1: General rules
Secure payment via Stripe
Payments accepted
SN/T 1730.7-2006
$154.00