SN/T 1730.5-2006Safety performance test for export fireworks and firecrackers. Part 5: Dropping test (English PDF)
出口烟花爆竹安全性能检验方法 第5部分:跌落试验
This is a limited preview
Buy now to download the full PDF (4 pages)
Need quotation for your management?
Get a formal quotation for SN/T 1730.5-2006 in 30 minutes.
Issued by
The General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Recommended
Issue date
January 26, 2006
Implementation date
August 16, 2006
Scope
SN/T 1730.5-2006 is the English-translated version of 出口烟花爆竹安全性能检验方法 第5部分:跌落试验.
SN/T 1730.5-2006 — This part of SN/T 1730 specifies the test methods and results of the export fireworks and firecracker drop test. This section applies to the drop test of export fireworks and firecrackers.
Found what you need?
Document preview — SN/T 1730.5-2006
National Standard of the People's Republic of China
- ICS
- 71.100.30
- Classification
- G 89
Issued by: The General Administration of Quality Supervision, Inspection and Quarantine
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Test methods
- 4.1 Number of samples
- 4.2 Test conditions
- 4.3 Test methods
Foreword
SN/T 1730 "Safety Performance Test Method for Export Fireworks and Firecrackers" is divided into.
--- Part 1. General;
--- Part 2. 75 ° C thermal stability test;
--- Part 3. Low temperature stability test;
---Part 4. Anti-vibration test;
--- Part 5. Drop test;
--- Part 6. Explosion test;
--- Part 7. Packaging identification;
--- Part 8. Product drug testing;
--- Part 9. Aphorism label inspection;
--- Part 10. Use safety performance test.
This part is the fifth part of SN/T 1730.
This part refers to the United Nations "Dangerous Goods Transport Recommendations - Test and Standards Manual" Recommendationsonthe TRANSPORTOFDANGEROUSGOODS---ManualofTestsandCriteria,(ST/SG/AC.10/11/Rev. 4) ("Little Orange Book").
This part is proposed and managed by the National Certification and Accreditation Administration.
This section drafted by. Jiangxi Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China.
1 Scope
This part of SN/T 1730 specifies the test methods and results of the export fireworks and firecracker drop test.
This section applies to the drop test of export fireworks and firecrackers.
2 Normative references
The terms in the following documents become the provisions of this section by reference to this part of SN/T 1730. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section the parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section.
GB 50161 Fireworks and Firecracker Factory Design Safety SN/T 1725 export fireworks and firecracker terminology
3 Terms and definitions
The terms and definitions established by SN/T 1725 apply to this part of SN/T 1730.
4 Test methods
4.1 Number of samples
Take 3 pieces in the smallest transport package.
4.2 Test conditions
4.2.1 Safety barrier
The distance between the inner wall surface of the reinforced concrete protective retaining wall and the falling impact center point is not more than 3m; the wall thickness is not less than 300mm; the height is not less than 2m.
4.2.2 Drop frame
The effective height is not less than 12m.
4.2.3 Release device
The sample can be released from a height of 12 m.
4.2.4 Venue
The safe distance of the site shall comply with the provisions of GB 50161.
4.2.5 Impact surface
A steel plate having a minimum thickness of 75 mm and a Brinell hardness of not less than.200 HB is fixed on a concrete foundation of not less than 600 mm thick;
The impact surface has a length and width that is at least 1.5 times the size of the smallest transport package.
4.2.6 Safety waiting period
The safety waiting period is 5 minutes. If there is a burning or explosion, the waiting time should be extended.
4.3 Test methods
4.3.1 Hang one sample on the release device.
4.3.2 The test personnel evacuate the safety barrier and operate outside the safe distance. Raise the sample to 12m high and release it to free the sample
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.
Referenced standards
How to Download SN/T 1730.5-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 50161-2022 — Fireworks and firecrackers engineering design safety standards
SN/T 1725-2006 — Terms of fireworks and firecrackers for export
SN/T 1730.1-2006 — Safety performance test for export fireworks and firecrackers. Part 1: General rules
Secure payment via Stripe
Payments accepted
SN/T 1730.5-2006
$154.00