Valid

SN/T 1619-2017Classification standards for plant post-entry quarantine station (English PDF)

植物隔离检疫圃分级标准

Preview PDF

This is a limited preview

Buy now to download the full PDF (8 pages)

Need quotation for your management?

Get a formal quotation for SN/T 1619-2017 in 30 minutes.

Issued by

The General Administration of Quality Supervision, Inspection and Quarantine

Level / Type

National · Recommended

Issue date

November 7, 2017

Implementation date

June 1, 2018

Scope

SN/T 1619-2017 is the English-translated version of 植物隔离检疫圃分级标准.

SN/T 1619-2017 — This standard specifies the management and technical elements of the general requirements for plant isolation and quarantine and the classification of isolation and quarantine.

This standard applies to the determination of the level of plant isolation and quarantine for the purpose of introduction, production, inspection and quarantine and research.

Found what you need?

Document preview — SN/T 1619-2017

National Standard of the People's Republic of China

ICS
65.020
Classification
B 16
Replacing
SN/T 1619-2005

Issued by: The General Administration of Quality Supervision, Inspection and Quarantine

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 General requirements
  • 4.1 General
  • 4.2 Location

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces SN/T 1619-2005 "Classification Standard for Plant Isolation and Quarantine", which is mainly changed compared with SN/T 1619-2005.

as follows.

---Modified the general requirements for isolation;

--- Modified the appendix.

This standard is proposed and managed by the National Certification and Accreditation Administration.

This standard was drafted. China Academy of Inspection and Quarantine.

Participated in the drafting of this standard. Liaoning Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Shenzhen Entry and Exit Inspection of the People's Republic of China Epidemic situation.

1 Scope

This standard specifies the management and technical elements of the general requirements for plant isolation and quarantine and the classification of isolation and quarantine.

This standard applies to the determination of the level of plant isolation and quarantine for the purpose of introduction, production, inspection and quarantine and research.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

SN/T 2542 Code of Practice for Isolation and Quarantine of Invasive Plant Propagation Materials SN/T 3072 seedling isolation and quarantine operation procedures ISPM02-2007 International Standards for Phytosanitary Measures for Plant Pest Risk Analysis ISPM05-2012 International Phytosanitary Measures Standards Plant Quarantine Glossary ISPM34-2010 International Phytosanitary Measures Standards Design and operation of post-entry phytosanitary

3 Terms and definitions

This document is defined by ISPM05-2012 and the following terms and definitions apply.

Plant isolation and quarantine plantpost-entryquarantinestation; PEQS After professional design, it has isolation equipment and special facilities, and is set up, audited or licensed by the quarantine administrative department, in accordance with the prescribed procedures.

Operation, specializing in the introduction of plant breeding materials isolation and planting, isolation and quarantine missions.

Isolation facility containfaffility Separate the isolated planting site from the surrounding environment and use specialized equipment and facilities to prevent the introduction/transmission of pests. Such as fences, greenhouses, Net room, artificial climate room, etc.

4 General requirements

4.1 General

Plant isolation and quarantine should consider the plants, quarantine pests and related media that may carry quarantine pests Biological characteristics, especially the way it spreads and spreads. Plant isolation and quarantine of isolated plants and their products, need to prevent any relevant quarantine Pest escapes and prevents organisms outside the quarantine area from entering the quarantine or spreading quarantine pests to the quarantine Beyond the epidemic.

Isolation and quarantine can consist of one or several isolation facilities. large fields, net rooms, glass greenhouses, laboratories, etc. Isolation used in isolation and quarantine Facilities should be based on the type of plant being imported and the quarantine pests that may be brought in.

4.2 Location

When determining the location of an inland plant quarantine, the following aspects should be considered.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 1619-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
8 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 1619-2017

$254.00