SN/T 1589.15-2012Rules for the inspection of household and similar electrical appliances for import and export. Part 15: Motor-compressors (English PDF)

Foreword

SN/T 1589 "Household and similar electrical appliances import and export inspection procedures" is divided into 15 parts.

--- Part 1. General requirements;

--- Part 2. vacuum cleaners and water suction cleaner;

--- Part 3. storage water heaters;

--- Part 4. radiant heater;

--- Part 5. humidifiers;

--- Part 6. sewing machine;

--- Part 7. air purifiers;

--- Part 8. massage apparatus;

--- Part 9. food waste disposers;

--- Part 10. Electric shoe polisher;

--- Part 11. thermal storage hand warmers;

--- Part 12. far-infrared heating products;

--- Part 13. Air conditioner;

--- Part 14. Hot and cold drinking fountains;

--- Part 15. motor - compressors.

This is Part 15 SN/T 1589's.

This section drafted in accordance with GB/T 1.1-2009 given rules.

Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

Introduction

"Household and similar electrical appliances import and export inspection of Part 15. The motor - compressor" is import and export of household electric motor - compressors Inspection work in accordance with the import and export of household electric motor - compressor testing play a guiding and regulating.

With China's accession to the World Trade Organization (WTO) and the "People's Republic of China Import and Export Commodity Inspection Law" and its implementing regulations amended Import and Export Commodity Inspection, great changes occurred in work mode. To adapt to the situation and change, the state inspection and quarantine departments in charge of the establishment of a Inspection and quarantine standards.

This part belongs to the standard system of inspection and quarantine fourth floor --- personality standard for motor - compressor characteristics, provides for import and export electricity Motivation - Particular requirements for compressor testing.

Import and export of household and similar electrical appliances inspection procedures Part 15. motor - compressors

1 Scope

SN/T 1589 This section provides import and export of motor - compressors of sampling, testing and judgment.

This section applies to household and similar motor - import and export inspection compressors, single-phase appliances rated voltage not exceeding 250V, Other appliances rated voltage not exceeding 480V.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2828.1 Sampling procedures for inspection - Part 1. batch inspection sampling plan according to accepted quality limit (AQL) retrieval GB 4706.17-2004 household and similar electrical appliances motor - Particular requirements for compressor SN/T 2838.2 specializing in import and export of electromechanical products inspection General requirements - Part 2. Terms and definitions

3 Terms and Definitions

GB 4706.17, SN/T 2838.2 and define the following terms and definitions apply to this document.

Sampling mode modeofsamplinginspection According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping grant implementation sampling, testing and inspection of conformity assessment activities.

Type Test mode modeoftypetest According to a predetermined cycle based on the mandatory requirements of national technical specifications type testing, according to on-site inspection requirements for product pumping batch inspection Inspection, supervision and implementation of the conformity assessment activities of the enterprise quality management system.

Compliance Verification mode modeofcomplianceverification According to the mandatory requirements of national technical specifications, inspection certificate and inspection documents, goods are consistent with the random testing can be carried out when necessary, and real Shi conformity assessment activities supervision.

Inspection Lot to carry out the inspection and collection of the same specifications, models, produced under the same conditions of production per unit of product, referred to as batch.

4 General requirements