SN/T 1589.10-2007Rules for the inspection of household and similar electrical appliances for import and export. Part 10: Electric shoe polishers (English PDF)
进出口家用及类似用途电器检验规程 第10部分:电动擦鞋机
This is a limited preview
Buy now to download the full PDF (5 pages)
Need quotation for your management?
Get a formal quotation for SN/T 1589.10-2007 in 30 minutes.
Issued by
General Administration of Customs
Level / Type
National · Recommended
Issue date
December 24, 2007
Implementation date
July 1, 2008
Scope
SN/T 1589.10-2007 is the English-translated version of 进出口家用及类似用途电器检验规程 第10部分:电动擦鞋机.
SN/T 1589.10-2007 — SN/T 1589 This section specifies the requirements for the import and export of electric shoe polisher, inspection and judgment. This part is suitable for single-phase appliances rated voltage not exceeding 250V household and similar electrical Shoe import and export inspection.
Found what you need?
Document preview — SN/T 1589.10-2007
National Standard of the People's Republic of China
- ICS
- 97.180
- Classification
- Y 69
Issued by: General Administration of Customs
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General requirements
- 4.1 Safety Requirements
- 4.2 Other Requirements
Foreword
SN/T 1589 "Household and similar electrical appliances import and export inspection procedures" is divided into 10 parts.
--- Part 1. General requirements;
--- Part 2. vacuum cleaners and water suction cleaner;
--- Part 3. storage water heaters;
--- Part 4. radiant heater;
--- Part 5. humidifiers;
--- Part 6. sewing machine;
--- Part 7. air purifiers;
--- Part 8. massage apparatus;
--- Part 9. food waste disposers;
--- Part 10. electric shoe polisher.
This section SN/T 1589 "Importers of household and similar electrical appliances inspection of" Part 10.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section is drafted. SZCIQ.
Introduction
"Household and similar electrical appliances import and export inspection procedures" is the import and export of household and similar electrical appliances inspection work in accordance with the import and export Household and similar electrical appliances test play a guiding and regulating.
With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection Test mode has undergone great changes, and changes in order to adapt to the situation, the state department in charge of inspection and quarantine inspection and quarantine standards organization established system.
This part belongs to the standard system of inspection and quarantine fourth floor --- personality standard, electric shoe polisher provides import and export inspection requirements.
Import and export of household and similar electrical appliances inspection procedures Part 10. Electric shoe polisher
1 Scope
SN/T 1589 This section specifies the requirements for the import and export of electric shoe polisher, inspection and judgment.
This part is suitable for single-phase appliances rated voltage not exceeding 250V household and similar electrical Shoe import and export inspection.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this part of the SN/T 1589's. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1:1999, IDT) Part 1 GB 4706.1-2005 Safety of household and similar electrical appliances. General requirements (IEC 60335-1:2001 (Ed4.1), IDT) the basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared
3 Terms and Definitions
GB/T 2828.1, GB 4706.1 and SN/T 0002 and established the following terms and definitions apply to SN/T 1589 to the present section.
According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping grant implementation sampling, testing and inspection of conformity assessment activities.
According to a predetermined cycle based on the mandatory requirements of national technical specifications type testing, according to on-site inspection requirements for product pumping batch inspection Inspection, supervision and implementation of the conformity assessment activities of the enterprise quality management system.
To carry out the inspection and collection of the same specifications, models, produced under the same conditions of production per unit of product, referred to as batch.
4 General requirements
4.1 Safety Requirements
Safety requirements for electric shoe polisher shall meet the requirements of GB 4706.1-2005 apply should consider the use of national differences (region).
4.2 Other Requirements
Where applicable, shall comply with the provisions relating to the use of national technical regulations (area) of the walkie-talkie, environmental protection, energy efficiency, performance and the like.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- SN/T 0002General rules for drafting of regulations for inspection of import and export mechanical and electrical commodity
SN/T 1589 · ISO 2859 · GB 4706.1-2005 · IEC 60335
How to Download SN/T 1589.10-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 2828.10-2010 — Sampling procedures for inspection by attributes -- Part 10: Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes
GB/T 2828.11-2008 — Sampling procedures for inspection by attributes Part 11: Procedures for assessment of declared quality levels for small population
Secure payment via Stripe
Payments accepted
SN/T 1589.10-2007
$204.00