SN/T 1429.7-2007Rules for the inspection of information technology equipment for import and export. Part 7: Cord telephone (English PDF)

Foreword

SN/T 1429 "inspection of import and export of information technology equipment" consists of several parts, the expected structure.

--- Part 1. General requirements;

--- Part 2. Desktop computer;

--- Part 3. Personal Computer;

--- Part 4. sale terminals;

--- Part 5. Digital cordless telephones;

--- Part 6. IT equipment power adapter;

--- Part 7. wired telephone;

This section SN/T 1429 "inspection of import and export of information technology equipment" in Section 7.

The partial replacement of SN/T 1163.1-2002.

This section compared with the SN/T 1163.1-2002 main changes are as follows.

--- Standard name changes;

--- Preparation for the inspection in accordance with the framework of SN/T 0002-2004 specified;

--- Further clarify the scope of the wired telephone;

--- Increasing the overall requirements of the inspection procedures;

--- Increased inspection and supervision mode;

--- Increase in the content of the environmental testing.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

Introduction

"Inspection of import and export of information technology equipment - Part 7. Wired telephone" is a wired telephone and export inspection work based on the Import and Export Inspection wired telephone and norms play a guiding role.

With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection Test mode has undergone great changes, and changes in order to adapt to the situation, the state department in charge of inspection and quarantine inspection and quarantine standards organization established system.

This part belongs to the standard system of inspection and quarantine fourth floor --- personality standard for wired telephone features, provides for import and export electricity cable Particular requirements for telephone test.

Inspection of import and export of information technology equipment Part 7. Wired telephone

1 Scope

SN/T 1429 This section provides the import and export of telephone cable requirements, sampling, testing and test results determined.

This section applies to access public telecommunication network, sending and receiving information having a wired telephone functions (including ordinary telephones, caller ID Display telephones, card management telephone, recording telephone, payphone, smart card telephone, IC card public telephone, digital telephone Inspection machine, etc.). This section does not apply with visual and other special-purpose fax and telephone cable test.

2 Normative references

The following documents contain provisions which, through reference SN/T 1429 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample Programme (ISO 2859-1:1999, IDT) GB 4943-2001 Safety of information technology equipment (idt IEC 60950:1999) GB 9254 Limits and methods of measurement of radio disturbance of information technology equipment (GB 9254-1998, idtCISPR22.1997) GB/T 15279-2002 of automatic telephone GB 17625.1 Electromagnetic Compatibility Limits for harmonic current emissions (equipment input current <=16A) (GB 17625.1-2003, IEC 61000-3-2:2001, IDT) the basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared

3 Terms and Definitions

GB 4943-2001 and SN/T 0002 and established the following terms and definitions apply to SN/T 1429 this part.

According to a predetermined cycle based on the mandatory requirements of national technical specifications type testing, according to on-site inspection requirements for product pumping batch inspection Inspection, supervision and implementation of the conformity assessment activities of the enterprise quality management system.

According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping grant implementation sampling, testing and inspection of conformity assessment activities.

According to the mandatory requirements of national technical specifications, inspection certificate and inspection documents, goods are consistent with the random testing can be carried out when necessary, and real Shi conformity assessment activities supervision.

To carry out the inspection and collection of the same specifications, models, produced under the same conditions of production per unit of product, referred to as batch.