Valid

SN/T 0801.6-2011Animal and vegetable oils and fats for export. Part 6: Determination of sediment for the soybean oil (English PDF)

出口动植物油脂 第6部分:豆油中沉积物的检验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (4 pages)

Need quotation for your management?

Get a formal quotation for SN/T 0801.6-2011 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

September 30, 2011

Implementation date

April 1, 2012

Scope

SN/T 0801.6-2011 is the English-translated version of 出口动植物油脂 第6部分:豆油中沉积物的检验方法.

SN/T 0801.6-2011 — SN/T 0801 This section specifies the method for determination of the import and export of soybean oil deposits. This section applies to the determination of the import and export of soybean oil deposits.

Found what you need?

Document preview — SN/T 0801.6-2011

National Standard of the People's Republic of China

Classification
X 14
Replacing
SN/T 0801.6-1999

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Principle of the method
  • 5 Reagents
  • 6 Instruments and equipment

Foreword

SN/T 0801 "export animal fat" is divided into 24 parts.

--- Part 1. Test method of insoluble impurities;

--- Part 2. phosphorus detection method;

--- Part 3. peroxide value test method;

--- Part 4. Washer off the heating test testing methods;

--- Part 5. Test methods melting point;

--- Part 6. soybean oil sediment testing methods;

--- Part 7. Test insoluble bromide;

--- Part 8. density test methods;

--- Part 9. transparency, smell, taste testing methods;

--- Part 10. cloud point test methods;

--- Part 11. Oil foot test methods;

--- Part 12. Flash Point Limits Test Pensky - Martens closed cup method;

--- Part 13. Test method for drying time;

--- Part 14. color detection method;

--- Part 15. unsaponifiables test methods;

--- Part 16. phosphoric acid test value testing methods;

--- Part 17. Determination of the freezing point of the fatty acid;

Moisture and volatile matter detection method;. --- Part 18

--- Part 19. free fatty acid value and test methods;

--- Part 20. hydroxyl value testing methods;

--- Part 21. Chlorophyll test methods;

--- Part 22. polyvinyl-based polymer testing methods;

--- Part 23. Inspection of residual solvent;

--- Part 24. Determination of moisture content Karl Fischer method.

This section SN/T Section 60801 of.

This section drafted in accordance with GB/T 1.1-2009 given rules.

The partial replacement of SN/T 0801.6-1999 "Importers determination of animal fat deposits." this section compared with the SN/T 0801.6-1999, the main technical changes are as follows.

--- Modify the standard name

--- Increase the definition and principle of the method deposits;

--- Increasing the time constant weight.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

1 Scope

SN/T 0801 This section specifies the method for determination of the import and export of soybean oil deposits.

This section applies to the determination of the import and export of soybean oil deposits.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

SN/T 0800.1 and export grain, feed inspection sampling and sample preparation methods

3 Terms and Definitions

The following terms and definitions apply to this document.

Sediment gardnerbreaktest Under the conditions prescribed method, it is separated from the oil and insoluble in carbon tetrachloride substances.

4 Principle of the method

Under specified conditions, with the weight determination of the amount of substance insoluble in the sample of carbon tetrachloride.

5 Reagents

Unless otherwise specified, the reagents were of analytical grade.

5.1 hydrochloric acid, density 1.19g/mL.

5.2 CTC.

5.3 Ethanol (95%).

6 Instruments and equipment

6.1 beaker, 125mL.

6.2 glass sand core crucible No. 4.

6.3 glass rod.

6.4 Analytical balance, a sense of the amount of 0.1mg.

6.5 Thermometer. Subdivision 1 °C, Range 0 °C ~ 360 °C, is subject to correction.

6.6 suction bottles and pumps.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 0801.6-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
4 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 0801.6-2011

$109.00